what up!

just chillin like a villain at the moment , gettin ready to go down and work on some engines . a couple to assemble and a couple to mount up for break in tomorrow :sweat:

coo coo.......hey man, you got any losi 2wd stuff left?

no , got rid of all the losi 2 wheel stuff

as a matter of fact the guy still owes me 100$ for everything :(

RB Five,

I live in Kuwait but that's just my US shipping address, Aramex shipping Co, i get stuff shipped to them and they ship to Kuwait, way cheaper than shipping directly to Kuwait.

Monty,

all engines as you mentioned, H.E.S tuned, filled cranks, dont they come with 17011?? 2010 Plus 4 Team edition??
about the break-in service, i want mine to be R2R but ill have to check with the guys about their engines.
you didnt tell me how many liters you run them?? on track or only bench??

about the pipes, i'm not really sure as you know i always run the 3005 on my P5 and plus 4 on buggy and 2013 on truggy.

what's the difference in performance between the 9901 and 2084?? low-end, top-end??

cheers Monty

Ali

What are the differences between the "J" shaped headers and the "C" shaped headers?

You mean headers suchas 41005 ,41001 incomparison to 41021 and like round headers ?


More low end torque from 41021 or ) round headers , nice free reving engine that is fairly responsiveto throttle input .

The 41005 , 41001 or ] double bend headers tend to smooth low end throttle response a bit but IMO create a more smooth climb to the peak rpm . Feels like they also create more rpm in most cases ;)

Ali , I run 1/2 gallon of byrons 30/11 race 3000 through the engines and I do it in an actual car , not a big fan of break in benches :D

9901 and 2084 are two totally different pipes , totally

I personally don't really like 9853 or 2084 in buggy , too much low end torque , I didn't use to like 9901 either but found it to be a bada$$ buggy pipe when used in conjuction with some other stuff . In your case , running on a super grooved track , u might be able to utilize a little extra torque down there .

Thank you sir.

Monty oh Monty what a great night of racing H.S.E Tuend plus 4c Tq's and wins at Harc Race in Alvin Tx. Monty the motor was super strong the track i was only able to make about 6 mins per tank due to the size of the track 150 x 125 it was a wide open track other then the corners and while the cars were in the air.

6 min runtime? huh? craziness!!


good job Matt !!:nod:

Monty here is a link to a video of the track
http://www.youtube.com/watch?v=FzXDi2CZOOg

still , 6 min???

craziness :confused:

ill call you in a while

Called ?

;)

nobody likes FMS' anymore ;)

I DO I DO!!! :cool: