|
Originally Posted by badjams
(Post 7000366)
no more flameouts on the plus4 and the p5xst was an animal. i ran it with a 7mm insert and 41005/9853 and it was too explosive for the small indoor track i run at. i found a better balance with a 6.5 mm insert 41021/9901.also the 77t plug was the way to go especially with the 20 degree temps at night here.they both ran great at about 200 degrees,although i'm not sure if that was too hot or cold for the 20 degree temps?? i can't wait to try out the toro nero, but i think it would work better for me on a bigger outdoor track!
|
Originally Posted by houston
(Post 7000272)
Its a 21-7 maximo
I don't deal too much in .28 engines but there are occasions I would have to check the rod length And the only modifications the .28 needs are top end mods , I am sure you know how to perform those ;) Dam ! I already got one of those..... I am needing a 28-7... The prject is my OFNA DM-1 that I use in the spring time.... I will be re timing it and having a new button made fo rit, after i'm done its going to extremely radical and should behave much like a 28 sized onroad engine.... However I need to be sure the sleeve design is suitable for the project.. I already have a OS 28, Picco 28, RB 928 and now I want the newest Nova.... This is strictly for straight line running, it will never used on any track.... |
i think the plus 4 only got a front bearing and a carb gasket in the block. i suppose that front bearing may have been leaking cause i had to move the needles a bit to get it running good. the p5xst really came to life after you did your magic:nod:
|
Max Power
I was wondering what pipe would be good for Max Power .21 M5 B and the
Max Power .21 C5-Q. I hav8e OS 2050 and 2060 - JP -1 and JP 3 and werks 2018. Just trying to see what I am going to need. The .21 M5 B will be for my truggy and the C5-Q for buggy. Thanks, for any help Nick |
Originally Posted by nwjones76
(Post 7001347)
I was wondering what pipe would be good for Max Power .21 M5 B and the
Max Power .21 C5-Q. I hav8e OS 2050 and 2060 - JP -1 and JP 3 and werks 2018. Just trying to see what I am going to need. The .21 M5 B will be for my truggy and the C5-Q for buggy. Thanks, for any help Nick I haven't ever tore a c5q down so I couldn't tell ya exactly what its made of . Probably your jp3 for that one Monty |
So I got a pm from somebody who claimed that I was telling people things to say about my engines and offering stuff up to them for promotions in return :confused:
That couldn't be farther from the truth and anybody who has dealt with me will confirm this . I am just a fellow racer like all you that happens to know a thing or two about something ;) Enjoy your engines guys and I hope they give you long life :nod: Monty |
Originally Posted by houston
(Post 7004079)
So I got a pm from somebody that claimed that I was telling people things to say about myengines and offering stuff up to them for promotions in return :confused:
That couldn't be farther from the truth and anybody who has dealt with me will confirm this . I am just a fellow racer like all you that happens to know a thing or two about something ;) Enjoy your engines guys and I hope they give you long life :nod: A thing or two? Who told you that........:lol: Monty knows how to smoke meat and play with balls:D:p:ha::p:D:p:ha: Hows things on your end? |
Originally Posted by McFly505
(Post 7004118)
A thing or two?
Who told you that........:lol: Monty knows how to smoke meat and play with balls:D:p:ha::p:D:p:ha: Hows things on your end? Just finally going through my personal engines and making sure they are good to go for nitro challenge , packing my boxes for the flight down and all that good stuff . You get to run lately ? Yes I can smoke meat and no comment on the balls subject :) |
what bins do you use money ? Plano ?
|
Originally Posted by Integra
(Post 7004297)
what bins do you use money ? Plano ?
|
Originally Posted by houston
(Post 7004417)
plano and ziploc , pack more stuff in my contico boxes with ziploc bags ;)
plano 1819XXL ? |
Originally Posted by Integra
(Post 7004681)
plano 1819XXL ?
just make sure you dont have any stuff in your boxes that they will question at the airport , especially since you are flying international . you probably gotta claim everything huh? |
Originally Posted by houston
(Post 6996528)
awesome , hope you enjoy it
i was getting a bunch of engines done and threw yours in the mix donnie :D pics of internals for ya I need to do it soon, but it looks like a max of about 50 degrees this week :( I can keep it hot with my heat gun. |
Originally Posted by dcracing
(Post 7005019)
Thank you sir, one question. What temp is too cold to break this motor in?
I need to do it soon, but it looks like a max of about 50 degrees this week :( I can keep it hot with my heat gun. keep engine aove 200° for break in 3 5 min. heat cycles (idle) , 3 10 min. heat cycles (on ground 1/4 throttle or so), 3 30 min. heat cycles (on ground 1/4-1/2 throttle) do not over rev , do not overlean , use a quality fuel with at least 10% oil , 15% is great |
Originally Posted by houston
(Post 7004782)
i dont know , i take the tags off the boxes before i even look at any part #
just make sure you dont have any stuff in your boxes that they will question at the airport , especially since you are flying international . you probably gotta claim everything huh? the plano's are BIG and have 2 latches on the front and 1 on either side. http://www.amazon.com/gp/product/ima...&n=228013&s=hi As for questionable item's ive done my homework and should be good to go....have you ever had any issues in particular traveling with your gear ? |
| All times are GMT -7. It is currently 08:34 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.