Thanks Monty. Just tapped on the crank with a wood dowel. Got the rod off. I'll send the block off to you on Monday.

Do you need the crank as well?

MONTY

i just got a new 9853SS and the set screw came out in my main. what size are those screws

Does anyone know if the Max Power 3 port has the 8 port case or 5 port and how much of a difference is there between the two? is the 5 port case same as P5 case

Monty,

wat pipe and header do you recommend for a PLUS 4c on a buggy?

might as well send it also joe

i believe they are 5mm douglas;)

every max 3 port i have seen has a 15009 massimo fantini tuned crank , 5 port crankcase and the 4 ring dished piston. they arent a standard 3 port :D

mileage - 9901ss/41021 , lots of bottom mid top 9853ss/41005 , lots of serious h.p. with crazzzy top 9886/41021

Thanks Monty for the replies!! and Trev can wheel also! getting real good super quick!!! but mostly under my watchful eye:lol:... anyways thats 3 damn pipe to choose from lol i need the one that will have nice fuel mileage and just enuff bottom with good mid and top...i love it smoooth from the bottom to the top so i can keep the tires planted with good grip?? dont make me stick a J-p 3 pipe on it lol

get a 9901ss , 41005 and 41021 header . try them and see which one you like :D

Hey Monty

i recieved my engine today :)
http://i118.photobucket.com/albums/o...DSC00404_2.jpg


Oops, i mean my 2 engines :nod:
http://i118.photobucket.com/albums/o...z/DSC00405.jpg


man i always forgot, i meant my 3 engines :D
http://i118.photobucket.com/albums/o...z/DSC00406.jpg


OOHH Good Lord, my final answer is 4 engines :lol: LMAO
http://i118.photobucket.com/albums/o...z/DSC00407.jpg

and Finally, My Nova Tower :p
http://i118.photobucket.com/albums/o...z/DSC00400.jpg

You rock Monty, Thanks for the free Plugs and the Stickers

cheers
Ali

you're welcome Ali , enjoy bro and let me know what you think of them :nod:

and thank you ,
monty

tomorow is the 3rd round race of our championship, hope it goes as the 2nd round, i'm running my Plus-4, after the race, we will break in the P5s using your method (thanks for the sheet BTW)
i will let you know how they run after the first gallon and will surely run it for the 4th race.

Thanks a bunch Monty

Ali

thanks, they ended up being 4mm but at least i had somewhere to start

Hey houston im looking to get another engine and I was wondering what would be better between a plus 4c and a modded p5xl with the plus 4c crank?Also what is your prices on both?