![]() |
lol yea wish ya could!! id have the fastest one out there! you come down here to race much? im guessing you go to wiregrass every year.
|
Originally Posted by slayyer
(Post 6375015)
lol yea wish ya could!! id have the fastest one out there! you come down here to race much? im guessing you go to wiregrass every year.
|
yea i know what you mean! im wanting to take a plane down to cali some day and race there.
|
Hey Monty!
I'm wondering what tracks are local to you. I'm in Wa on the Olympic Peninsula. Portland is about 4 hrs down 101 for me. I'd like to bring my son out to see a few REAL tracks with good drivers. We have Area 52 on the other side of the pond but I'd like to bring him out to a few different ones in the region. I'm a resurrected racer from back in the Bear Creek days here in Wa. I'm back with my 10 year old son doing club stuff on the 8ight and 8ight-Ts. My son's on the Mach454/Picco carb/RE11 running sweet and I'm checkin out a Go 25 5-port in my 8t and an older Ninja MR21 in the 8. I ran OS and RB back in the day...mostly because the Nova I bought was just too darned hot for my xxx-nt. It's bottom was just too sick. I'd like to check out the Plus 4 if this Go Tech doesn't pan out. Anyway, hope to meet you one of these days. Mark Miranda |
New motor ran great in the truggy
Great job on this baby Anyone reading this thread for the first time and looking for a motor. Look no further Monty's nova's are top notch Have him break them it in for you with the mileage tune and you are set I mean really f@#k'in SET Thanks again |
monty i seen vareck ask you this and you said ask her and im curious,
are you really running int at nxwc |
Originally Posted by makaluch
(Post 6375227)
Hey Monty!
I'm wondering what tracks are local to you. I'm in Wa on the Olympic Peninsula. Portland is about 4 hrs down 101 for me. I'd like to bring my son out to see a few REAL tracks with good drivers. We have Area 52 on the other side of the pond but I'd like to bring him out to a few different ones in the region. I'm a resurrected racer from back in the Bear Creek days here in Wa. I'm back with my 10 year old son doing club stuff on the 8ight and 8ight-Ts. My son's on the Mach454/Picco carb/RE11 running sweet and I'm checkin out a Go 25 5-port in my 8t and an older Ninja MR21 in the 8. I ran OS and RB back in the day...mostly because the Nova I bought was just too darned hot for my xxx-nt. It's bottom was just too sick. I'd like to check out the Plus 4 if this Go Tech doesn't pan out. Anyway, hope to meet you one of these days. Mark Miranda it was kind of a joke when i said local cause they are not really local to portland . there is eugene , sutherlin , area 52 aqnd well it is not really a "race track" persay but rise rc . you know gary culp from here in portland ? see ya round , monty might be a sweeeet facility goin on round here in portland next year though :nod: |
Originally Posted by Crazy Carl
(Post 6375366)
New motor ran great in the truggy
Great job on this baby Anyone reading this thread for the first time and looking for a motor. Look no further Monty's nova's are top notch Have him break them it in for you with the mileage tune and you are set I mean really f@#k'in SET Thanks again keep me posted old man monty |
Originally Posted by losi_racer
(Post 6375447)
monty i seen vareck ask you this and you said ask her and im curious,
are you really running int at nxwc |
hi monty on the plus 4c looking at the pic of the tuned crankshaft can you tell if it is done like the modders do im quessing this is were the improved throttle responce and run time come from. what run time increases can i expect from the plus 4 as the modders usually find 1 or 2 mins is the 4c gonna be the same. i quess the ceramics will help also the run time
The reason i ask is at the last round of the UK nationals the top novarossi driver was pitting at 8mins on quite a big track using plus 4 9901 41021 and a 6.5 venturi and the top 2 Os speed drivers were getting 10mins each from what i have heard how is adam drake getting 13 odd mins any feedback would be great help |
ex tech's
yo big guy, shoot me a pm on the status of those ex-tech's. I can paypay on Friday whatever they need to get ship shape.
|
Originally Posted by stu541
(Post 6377484)
yo big guy, shoot me a pm on the status of those ex-tech's. I can paypay on Friday whatever they need to get ship shape.
i will let ya know steve |
thanks
|
I have a tuned .21 GRP that ate a glow plug coil. Do you have any interest in a franken mod of some sort to squeeze a backup motor from it? P/S is toast and the rod needs a look over by a pro. Anyway, if something can be done reasonable, i'll try it out, if not and one of our modders want it they can have it in hopes I can save some pennies on my next mill. I am throwing this out to all of you modders. Sorry if I am wasting your time.
|
Originally Posted by Buzz3
(Post 6380275)
I have a tuned .21 GRP that ate a glow plug coil. Do you have any interest in a franken mod of some sort to squeeze a backup motor from it? P/S is toast and the rod needs a look over by a pro. Anyway, if something can be done reasonable, i'll try it out, if not and one of our modders want it they can have it in hopes I can save some pennies on my next mill. I am throwing this out to all of you modders. Sorry if I am wasting your time.
|
| All times are GMT -7. It is currently 12:02 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.