![]() |
Originally Posted by jewn_beef
(Post 9972316)
What pipe does cody like for buggy like my disco motors alot but 2013 is a little much in buggy i am running 2058 is what i am thinking
Originally Posted by ScottyM
(Post 9972843)
DO you know the diameter of the outer race??
|
Originally Posted by pitpop
(Post 9982059)
2058
25.3 |
You should try these alpha engines...Local guy I know is sponsored by them and have seen them run, badass product.
http://www.alpha-rc.com/pdt_view.asp?sn=282 |
Originally Posted by FNS156
(Post 9987610)
You should try these alpha engines...Local guy I know is sponsored by them and have seen them run, badass product.
http://www.alpha-rc.com/pdt_view.asp?sn=282 |
Originally Posted by FNS156
(Post 9987610)
You should try these alpha engines...Local guy I know is sponsored by them and have seen them run, badass product.
http://www.alpha-rc.com/pdt_view.asp?sn=282
Originally Posted by yamahamxracer
(Post 9989203)
Yea........try tuning them..........and runtime was terrible on mine. also ran Very hot. And yes, I DO know how to tune. Everyone usually come to me to tune their engines.
|
Yesterday at palm desert motor disco was great had prob. In frist qual. With motor bogging at first blip took apart after round one to air seal carb again and found idle screw broken went to pk aka pitpop and well he spent half an hour filing down the slide barrel and replacing my idle screw
what i didnt expect was that he tooj the time to clean the carb grease everything back up and show me a trick by gluing the boot ti the base. It was fabulous i put it back in my disco bench tuned it and then at second qual pitpop came over helpex me pit my car to make sure tune was good which it was best customer help from a rep of any rc product i have ever owned. Oh yeah in my main the disco went 12 min. Main without pitstop actually about 12:30 by time got to pit lane came in at 241 once again big thanks to pitpop Waz also cool to see him run in truggy class fun day at the toys 4 tots race in palm desert |
Originally Posted by jewn_beef
(Post 9994372)
Yesterday at palm desert motor disco was great had prob. In frist qual. With motor bogging at first blip took apart after round one to air seal carb again and found idle screw broken went to pk aka pitpop and well he spent half an hour filing down the slide barrel and replacing my idle screw
what i didnt expect was that he tooj the time to clean the carb grease everything back up and show me a trick by gluing the boot ti the base. It was fabulous i put it back in my disco bench tuned it and then at second qual pitpop came over helpex me pit my car to make sure tune was good which it was best customer help from a rep of any rc product i have ever owned. Oh yeah in my main the disco went 12 min. Main without pitstop actually about 12:30 by time got to pit lane came in at 241 once again big thanks to pitpop Waz also cool to see him run in truggy class fun day at the toys 4 tots race in palm desert Something I've found in RC racing, is most people will give you just about anything they have to keep you running. In no other sport hobby or profession have I seen anything like this.. |
Is it possible to get the neo engine?
|
Originally Posted by ScottyM
(Post 9994752)
That is one of the reason Paul and Cody are sponsored by Orion.. Good People helping out other good people.
Something I've found in RC racing, is most people will give you just about anything they have to keep you running. In no other sport hobby or profession have I seen anything like this.. |
Originally Posted by yamahamxracer
(Post 9996696)
Is it possible to get the neo engine?
|
Has anyone ran all three pipes on the disco motor
2057 2058 2013 I am running 2013 and in the ae 8.2 with new drivetrain it just plain has to much bottom end wondering how much 2058 will calm bottom or if should just go to the 2057 which is all top i believe |
I dont think Horizon is going to sell that motor. I have been asking even got
ahold of ORion. Looking like you can get it pretty much every country but US. PK little help here:nod: |
Originally Posted by jewn_beef
(Post 9997451)
Has anyone ran all three pipes on the disco motor
2057 2058 2013 I am running 2013 and in the ae 8.2 with new drivetrain it just plain has to much bottom end wondering how much 2058 will calm bottom or if should just go to the 2057 which is all top i believe |
Originally Posted by jewn_beef
(Post 9997451)
Has anyone ran all three pipes on the disco motor
2057 2058 2013 I am running 2013 and in the ae 8.2 with new drivetrain it just plain has to much bottom end wondering how much 2058 will calm bottom or if should just go to the 2057 which is all top i believe |
Is the CRF carb the same carb that is on the Discovery?
|
| All times are GMT -7. It is currently 04:32 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.