|
Rb rod
I remember reading a post by Maximo that owns tns and he said the drake engine uses the bigger Rb rod and they still make that motor ! Get in contact with novarossi USA
|
Originally Posted by travertini
(Post 15027990)
I remember reading a post by Maximo that owns tns and he said the drake engine uses the bigger Rb rod and they still make that motor ! Get in contact with novarossi USA
|
Originally Posted by jersey
(Post 15027989)
Thanks for heads up, I took it completely apart. Rod isn't that bad actually. The rear engine bearing seems to have a lot of play in it. I think if I replace that I'll be good. I gotta figure out what size bearing to get for the rear engine bearing. Anyone know what size it is. I'll take it out and measure it. I would like to get another head if there cheap. Probably won't be able to find one.
|
needing a little help
i have just picked up a bxr sls5, seeing as rb plugs are unavailable what would be the next best plug to run? i was thinking the nova c6? also what pipe i have nova 9901 rb 2045 jp4 ? |
Originally Posted by damang999
(Post 15042111)
needing a little help
i have just picked up a bxr sls5, seeing as rb plugs are unavailable what would be the next best plug to run? i was thinking the nova c6? also what pipe i have nova 9901 rb 2045 jp4 ? Rex |
Originally Posted by 22Racer
(Post 15042296)
Yes a C6 is what it probably came with stock.
Rex Any recommendations for a pipe in buggy |
Don't mean to be pedantic, but afaik RB had their own plugs which were not %100 identical to NR. Nevertheless, the NR C6 is best I think...
|
Hi have one also and it's a great engine.
I comes with a #5 so you should be able to get the run in and at least another couple of litres through it (4 litres total or 1 gallon) then go to a Nova #6 TGV offroad plug. Werks 2058 is what I have been running for a pipe and is great for run time and power. |
Originally Posted by jersey
(Post 15026759)
Hey how's it going guys, I have a rb bxr sls3 engine. I just cracked the top cooling head fan off and I took apart the engine to check the internals also. It looks like I need a new rod also. It has a lot of play in it and I don't wanna blow it up haha. Anyway does anyone know where I can get rb engine parts for this engine. Searched a little but I'm still at track now. I'm trying to see if it's worth replacing the parts or just start using another engine. Any help would be greatly appreciated! Thanks
|
Does anyone have a rb tm728 or tm928 or parts
Originally Posted by bonesbs
(Post 15048130)
Jersey - If you are looking for .21 engine RB rods send me an e-mail. [email protected]
|
I haven't been on this forum in almost 3 years.
?????? RB Concepts Gone?????? Today is a sad day. I need parts for a Worlds S7 and I have a brand new Never fired Worlds S7. What a great product. Is the New Company RC Concepts taking over the engine line?? |
Originally Posted by Dr. Evil
(Post 15212483)
I haven't been on this forum in almost 3 years.
?????? RB Concepts Gone?????? Today is a sad day. I need parts for a Worlds S7 and I have a brand new Never fired Worlds S7. What a great product. Is the New Company RC Concepts taking over the engine line?? Bearings is usually no problem, but other then that you probably need to search Ebay. |
AAAAAAAAAAAAAAaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa gulp...
LOL.. Yeah. Oh well. |
I have a RB S7 MSC Year 2006
I just hope the engine does not break and lasts until there is no more compression. Because now there are no more parts to tell you if something breaks. |
the novarossi karma and mantra both share the square stroke of the ws7 series not sure of the outside diameter of the sleeve so parts may be available there. the novarossi drake motor is also packing RB parts(its a C5 I believe).
I bet Novarossi has a big stock of parts and we will see a few cheaper engines and maybe some expensive ones carrying RB parts in them. |
Originally Posted by HaulinBass
(Post 15213694)
the novarossi karma and mantra both share the square stroke of the ws7 series not sure of the outside diameter of the sleeve so parts may be available there. the novarossi drake motor is also packing RB parts(its a C5 I believe).
I bet Novarossi has a big stock of parts and we will see a few cheaper engines and maybe some expensive ones carrying RB parts in them. Quite possibly this can happen or it already happens. Because Novarossi's stock has RB parts stock they want to sell. Even on their cheaper motors. The Novarossi quality is there. |
On the other hand you will have a new Novarossi for the price of a P/S/R set for your WS7 (if you can find something that will fit)
|
Originally Posted by Roelof
(Post 15214040)
On the other hand you will have a new Novarossi for the price of a P/S/R set for your WS7 (if you can find something that will fit)
Yes for 200 € or less I get a new Novarossi. I take the RB Procudtcs complete exhaust from my S7 MSC. |
Originally Posted by bonesbs
(Post 15048130)
Jersey - If you are looking for .21 engine RB rods send me an e-mail. [email protected]
this is old, bu8t how stocked are you??? |
Anybody want to buy a brand new never mounted RB Blast V15?
|
I think the Worlds S7 was purchased in the 90s. I need to check to make sure it's not rusted. . I kept it in a cool place with oil in the engine.
|
Originally Posted by TommyBlazin
(Post 15214321)
this is old, bu8t how stocked are you???
|
Hi guys- need some help- I have a RB BXr sls DI5 and i need a rear engine bearing- I can't see to locate any info on Size- it's Not a 14.5x26x6- they don't have the step down like this does- Thanks in advance
|
Ball Bearings for Nitro R/C Engines - NOVAROSSI WORLD
You probably need the 16009 The SLS is the super long stroke and in that time they did come with special bearings. If you are handy or know someone who is, you can modify the crankcase to fit normal bearings https://www.rctech.net/forum/onroad-...gs-virtus.html |
Rb yuukanai 1 engine tune?
Can someone please help bought this awesome engine but not to sure on tuning an no idea where it's at...... where would be a good starting point please if I was to turn it all back to closed. Thank you
|
Just as an update to previous questions on here and to clear something I have been asked a few times, the old RB 01122-C Con rod has now been superseded by the Novarossi 07014 Rod for anyone wanting to rebuild their old motors. This has been mentioned above but i dont think anyone ever gave the part number.
|
Afternoon all, hope your all well.
I'm new to this this forum, ive just finsidhed rebuilding my X1CRT pro which has the RB WS7 2 X3 engine. Its been a long time since it last run....maybe 8 years and im wondering whats glow plug to buy and the RB ones are impossible to purchase in the UK. Also unsure whether i need a standard or turbo plug?? Any guidance would be much appreciated |
nova 6 probably
|
The WS7 was a Novarossi based engine. Stock, they came with "standard" head, but a turbo head was an option. RB went out of business a while ago, so finding parts isn't easy... However, as far as plugs go, no need, as most standard plugs will fit. Like previously stated, a Novarossi standard "6" plug should be perfect, in colder weather (under 55* F) you might try a "5". There can be allot of other things that will effect your engine, but if you use a "6", it pretty much works all the time...
|
| All times are GMT -7. It is currently 11:24 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.