Yes the .21 has plenty of power for the truggys and that .24 is going to be a monster more power than you would ever need and a whole lot of fun :nod:..either motor is fine for the truggys if you run on a smaller tight track i would say .21 but if you race or play on a big track like 200 ft plus then the .24 is the way i would go, both are great motors you cant go wrong with either...

I was @ CRC in Rome,NY for Rd 1 RCPro. Ed had let Greg Vogel run the .24 in his trug. That thing was just plain NASTY! Based on that, I'd say the .21 Race Prep would be great in a trug. I know a few runnin them now and doing very well.

I ran yesterday @ The Barn/Chester,NY in the North East Super Series, Rd1.
My engine doesn't even have a full Gal though it yet, metal pinch still exists.
Two 5 min quals, engine temping around 220 (temp'd by Ed), finishing up with
1/2 tank after both runs. Qual one, it felt pig rich but still made decent power.
The only time all w/end I touched the needles was to lean the top 1 hr before Qual 2. I pit at about 4:45 in my 10 min main. Still had a 1/2 tank at the end of the run. I am running the Race Prep with Byron's Gen 2 30, O.S P4, Werks 2013 in a TQ SX8 bug. I am very, very impressed.
PS- Anyone wanna buy a NR 215K to help me get another ExTech? :P:P:P

Tisk tisk Joker....
 

Had to post a pic. FULLY modded Extech .21 Team Engine. I hope it performs as good as it looks. That is one sick head! New pair of shoes for the 808 too.
http://i163.photobucket.com/albums/t...echworange.jpg

;)

Joe - oh good lord.. he went with the pipe that makes 2hp.. that was even to much for me lol :D :sneaky:

Its what I was using before LOL! I might as well try it before I get a new pipe. I would really like to try the 1005 pipe. I'm using Maxlife shoes and 1.0 springs until my Trininty clutch setup comes in. Chad do you know if they have the adjustable clutch in a 15t for the xray in stock?

good ole 086 LOL !!!!!!!!!!

you guys should try a MSR 1005 !

hey i see your too good to come over and chat slay :cry:

;)

My Ex Tech is SERIOUS! I was able to TQ and win the Truggy class by 2 laps at round 1 of the N.E.S.S. (North East Super Series) this weekend. My Ex Tech was ballistically fast performed flawlessly! Cant wait to try the fully modded version.

Aye chad, I need a short sleeve T-Shirt!

Joe was wheelin his Buggy this past weekend at Barnstormers RC & I bet if he put some wings on it it would have taken off the ground with the tune that Ed Bridges layed on it! :eek:

http://i163.photobucket.com/albums/t...1/Barn1133.jpg

;)

aye joker, when are you getting your extech?

Well, I ripped the Jammin out & sold it & now I got a back-up engine in my Buggy so I guess it's my time now, huh?! :rolleyes: lol

I'll tell ya if I had the spare cash I would have pick up a .21 without a doubt after seeing how fast Herman's Buggy was after he ripped that GRP out & replaced it with the Extech.

I'd put the Extech in my Truggy though, them damn things make amazing power!!! OMG :eek:

Hey guys,where can i buy one of this engine?
just tell me 2 internet shops.[because the one will be the amain,so..].
and how can i understant if it is the last version with the coating shaft?

;)

Yeah, Make sure you wear your seat belt!!! :nod: lmfao

where can i get the .24 ver? i wanna try these engines have been planning on trying them in both my buggy and truggies

Finally put 2 tanks through the full mod today. HOOOOLLLEEE SHHHHEEEET! I have NEVER seen an engine that spooled up so fast. I dropped down to a 15 on the 808 since I was doing up a new clutch. The 16 is going right back in. The power band is so smooth. It has to be though or it would be impossible to control. It seemed like it was set a bit lean from though. Temps jumped right up to 250. Had to fatten it up a little. But now it is dumping out tons of smoke. I just didnt want to get it to hot right away. After a hi speed pass to clearf it out it would drop down right away for a sec then idle up and stay there. Top end was scary though. It threw the tires right of the bead on my break in wheels. I wish Ed was here to help me dial it in. Of all the .21's I've seen I really dont think there is anything that could touch this mill right now. And I can see that runtimes will be very good.

I told you guys to wear you damn seat belts!!! :D Nobody wants to believe the Joker, I wonder why?! :sneaky: lmao

hi guy,s i just ordered the eb extech but sadly could not afford the pipe,what i do have is a H/N 2062 and a BOSS 2053, and a GO FEMCA 0801
could anyone tell me witch of these would be the best in the meantime
CHEERS

Is that a trick question? You know that 0801 kicks arse! Dont know about the others.

you can also try R/C mania
guys name is Jerry Acord unlike some online ordering you can actually talk to him and know what your getting, and he races very competitivly so he can give you all the insight.
R/C mania 304-929-4161
hope this helps
MO

slaytanic - where you located?

Chicago. Is it normal for temps to shoot up that way right out of the box on these? Like I said I only got 2 tanks through it and didn't have alot of time to play with the needles.

Hmm,i live in Greece!and i don't buy from amain,can you sent me his email?

Slay - what fuel are you using? Another thing it might be.. is how hot and humid the air is.. I know a couple of other ppl that have had to richen there bottom end at the start.. :D

CHEERS??? Who's got the beer?! uh ohhh I hope you didn't mistake it for the nitro!!! :eek: lol

Well i got some bad news..... After afew guys seen my extech run,im not the only 1 at our track with that engine anymore :cry: lol but the good thing is that i can still beat 1 other guy there now

Well, thats not bad news for Trinity at all! And good for you! ;)

i have the EB Mod Race Spec engine i cant wait to get my hands on the fully mod and the .24 :nod:

Oooh gezzzzz The .24.... you must really have a death wish! :sneaky: lol jk!

When will the .24 be widely available? Also, does anyone know of a target price?

lets put it like this..

the .21 fully modded with 086 is 2HP

the stock .24 make 1.81 which is more than the OS28 and RB28 on Ed's dyno. I have seen the graphs... Now what will the fully modded .24 make in HP :sneaky:

just to think about that kinds make me wont to go ahead and puke now lol

.24's are in the air and on the way here now.. FINALLY.. It will take about another week for Ed to wave his wond and do his magic :lol:

Ooooh MOMMA!!! :eek:

;)

;)