2LikesGo-Tech Engines Thread
....i forgot about u FLANNO,man now i feel bad lol...i forgot to mention a very important person in the GO FAMILY!...
09-01-2010 | 09:07 PM
It's all good. 
Just reading the posts about being pushy got me thinking is all.
We are all only tryin to help, actually most the RC community is like that !
Thats what these forums are for, discusion and help.
I don't know everything and we are all always learning, but if I'v had experiance with something I'll share it if it corresponds with any discussion or questions on these forums. (including the GO thread in the Aussie section on here)
I check and post on both when ever I'm on line, especially the Aussie thread because I live in OZ.
Just reading the posts about being pushy got me thinking is all.
We are all only tryin to help, actually most the RC community is like that !
Thats what these forums are for, discusion and help.
I don't know everything and we are all always learning, but if I'v had experiance with something I'll share it if it corresponds with any discussion or questions on these forums. (including the GO thread in the Aussie section on here)
I check and post on both when ever I'm on line, especially the Aussie thread because I live in OZ.
09-01-2010 | 09:15 PM
Tech Master
iTrader: (12)
Joined: Nov 2008
Posts: 1,360
i would say you guys are both good help. NOt pushy at all. You guys just state what you think and from what ive tried on this thread its all been good advice. I had to say thanks for the help. On answerrc if you by anything massive mods and put in mm for a discount code i think its like 25% off.
09-01-2010 | 09:16 PM
i just want to ask ever1 on here if they think i am pushing product upon them!....i have done nothing but try and help myself and other fellow rc enthusiasts learn more about these engines!.....if some1 wants to purchase something i tell them where they can get it!...they can order through me if they are close to CALI or they can go to GRIZZ1 or MASSIVE MODS or any1 that can HELP them!
.....i am only trying to be as HELPFULL as i can!....but somebody(im not going to mention names) just told me that i am pushy and i think i know it all,and i should stop!....if any1 thinks that PLEASE let me know and i will stop!....it actually upsets me that i cant be HELPFULL without getting bagged on for it!
.....i am only trying to be as HELPFULL as i can!....but somebody(im not going to mention names) just told me that i am pushy and i think i know it all,and i should stop!....if any1 thinks that PLEASE let me know and i will stop!....it actually upsets me that i cant be HELPFULL without getting bagged on for it!
09-01-2010 | 10:10 PM
Tech Adept
Joined: Jan 2009
Posts: 101
From: Taranaki New zealand
Come on guy`s HARDEN UP LOL JK.
I have a great relationship with Grizz and Go New Zealand.
This forum is a very good advert for the product,no BS,just good honest advice from people that know what they are talking about
Bill
I have a great relationship with Grizz and Go New Zealand.
This forum is a very good advert for the product,no BS,just good honest advice from people that know what they are talking about
Bill
09-01-2010 | 10:17 PM
09-01-2010 | 10:46 PM
Tech Elite
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Cheers Bill, nice to know your lurking around the thread 
It's all good on here as far as I can see. It's got to be one of the most friendly and informative threads on the RCTech network.
There are quite a few seasoned racers on here that have been running the MG66, GO GX, and the older GO Pro Series motors for a long time, so there is a wealth of knowledge out there to be shared.
I know some of my replies get a little long winded, but it's hard to explain stuff thoroughly if your not talking face to face. If I ramble on too much just let me know and I'll put a sock in it
It's all good on here as far as I can see. It's got to be one of the most friendly and informative threads on the RCTech network.
There are quite a few seasoned racers on here that have been running the MG66, GO GX, and the older GO Pro Series motors for a long time, so there is a wealth of knowledge out there to be shared.
I know some of my replies get a little long winded, but it's hard to explain stuff thoroughly if your not talking face to face. If I ramble on too much just let me know and I'll put a sock in it
Last edited by grizz1; 09-01-2010 at 11:19 PM.
09-01-2010 | 10:52 PM
Oh and have you seen the new HN2080 pipe....looks like a direct copy of the 2072...If the quality is the same as their 2047 pipe it'd be nice..My 2047 has outlasted any other pipe I've ever owned.
http://cgi.ebay.fr/ws/eBayISAPI.dll?...=STRK:MEWAX:IT
http://cgi.ebay.fr/ws/eBayISAPI.dll?...=STRK:MEWAX:IT
09-01-2010 | 10:54 PM
Thread Starter
Tech Master
Joined: Jan 2006
Posts: 1,977
From: Sydney
09-01-2010 | 11:22 PM
Tech Elite
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
The shim amounts listed with the recommended glow plug choices are shim stack only, and do not include the built in .3 of the head button - correct ?
Thanks bro
09-01-2010 | 11:44 PM
Thread Starter
Tech Master
Joined: Jan 2006
Posts: 1,977
From: Sydney
Hey Mark - had a query on here the other day as regards the Shimming 101 article on the Massive site. Just confirming for a couple of people that asked -
The shim amounts listed with the recommended glow plug choices are shim stack only, and do not include the built in .3 of the head button - correct ?
Thanks bro
09-02-2010 | 03:08 PM
Joined: Dec 2009
Posts: 7,916
From: northern michigan
ok, have a big race saturday!!!! im in the top 3 for points. this is last race untill the big event!! if i stand in the top 3 after this race, ill be in the biggy!!!
i have a GO .21 and nova .21 plus 4, i have been messin around with both engines today and have the GO installed right now, i am still have a issue with 1/2 tank lean issue, is this high speed needle related or low end needle???, im running composit shoes with green springs and aluminum shoes with gold spring, 30% byrons fuel, 7mm restricter in carb, 086 pipe and header. can someone give me factory setting?? or is factory settings the problem with 1/2 lean issue? going to be running a med to tight track with one long straight (180 feet), would like to race the GO .21, any tipps would be great!! thanks
i have a GO .21 and nova .21 plus 4, i have been messin around with both engines today and have the GO installed right now, i am still have a issue with 1/2 tank lean issue, is this high speed needle related or low end needle???, im running composit shoes with green springs and aluminum shoes with gold spring, 30% byrons fuel, 7mm restricter in carb, 086 pipe and header. can someone give me factory setting?? or is factory settings the problem with 1/2 lean issue? going to be running a med to tight track with one long straight (180 feet), would like to race the GO .21, any tipps would be great!! thanks