Go-Tech Engines Thread
#5221
Tech Apprentice
iTrader: (1)
Joined: Jun 2008
Posts: 93
From: Australia
A 50 sec video of my GO .25 with a 0801 pipe running up and down the street.
As stated in another thread I was having problems with the glow plug element being "sucked out" of the plug.
Put a new rod in as there was some slop in the original rod (10litres old)
and the glow plug is no longer becoming distorted and "sucked out".
I was just putting on a show for the camera, I normally race.
As stated in another thread I was having problems with the glow plug element being "sucked out" of the plug.
Put a new rod in as there was some slop in the original rod (10litres old)
and the glow plug is no longer becoming distorted and "sucked out".
I was just putting on a show for the camera, I normally race.
#5224
Bring it on!
#5225
Thanks dude. It's all good. You are welcome to do whatever you want with them. I will have to have a look through and see if I have got any more shots of of it.
#5226
hi all.i was talking t o ed from ebmods today.i asked him about getting a shirt and he gave me this link to order shirts and other items.check it out.
http://www.cafepress.com/ebmods
http://www.cafepress.com/ebmods
#5229
#5230
hey grizz... im a wellington boy
im part of the cmr club.... i think ive seen you before at the nats... i was running a 7 port go in my buggy... i noticed most of the go's running so im guessing one of them was your rig
but thanks for the warm welcome
im part of the cmr club.... i think ive seen you before at the nats... i was running a 7 port go in my buggy... i noticed most of the go's running so im guessing one of them was your rig
but thanks for the warm welcome
#5231
Thanks for tips guys
I ran 2 full tanks thru my .21 5 port late yesterday
It got jammed a couple of times but by the end of the 2nd tank was idling pretty smooth
Sounds awesome

Will be out running around the oval today to get it fully run in
I ran 2 full tanks thru my .21 5 port late yesterday
It got jammed a couple of times but by the end of the 2nd tank was idling pretty smooth
Sounds awesome


Will be out running around the oval today to get it fully run in
#5233
I was running the bright orange GS CL-1, but not any more. Put the old girl to rest in favour of a new X-Ray 808 for 2009. Still running the same Massive Mods Stage 5 5 Port motor though - it is a beautiful thing, and makes the lightweight X-Ray really haul butt

Later
#5234
And my GO .21 7Port LIVES!!! Its had 3 tanks idled through it and its had 2 tanks running around the back yard in figured 8's and up and down the drive way and over a few small obsticles trying to behave myself and doing it all properly.
And teh best part was both kids fell alseep while I was idling it and I kept going for another hour
... WOHOO! I was suprised I wasnt in teh bad books but the Mrs came out to see why I was doing things the way I was, which was good 
I am amazed at the grunt this thing has even with it running rich at the moment. I am really looking forward to leaning it off over the next 8 tanks slowly and letting it rip!
KK, One very happy and excited Go-Tech owner!
And teh best part was both kids fell alseep while I was idling it and I kept going for another hour
... WOHOO! I was suprised I wasnt in teh bad books but the Mrs came out to see why I was doing things the way I was, which was good 
I am amazed at the grunt this thing has even with it running rich at the moment. I am really looking forward to leaning it off over the next 8 tanks slowly and letting it rip!
KK, One very happy and excited Go-Tech owner!



2Likes




.... wish santa had left that under my tree