Team Magic G4
#7486
because recevier hole under chassis is too large..
so i put engine mount on chassis to prevent bending..
very hard~~
i could not believe screws hardness.
i think this will not affect chassis roll..
#7487
Tech Elite
iTrader: (10)
if you don't mind, pls change rear upper link like this Link:
(Daz guide it)
http://www.rctech.net/forum/showpost...postcount=7401
i had a good feeling with the rear sway bar 45.
But more test is need
(Daz guide it)
http://www.rctech.net/forum/showpost...postcount=7401
i had a good feeling with the rear sway bar 45.
But more test is need
cheers
champ
#7488
#7490
#7492
g4+
has anyone finished the g4+ kit yet
and do hey use the same set up as the g4s
grub
and do hey use the same set up as the g4s
grub
#7493
g4+
has anyone finished the g4+ kit yet
and do hey use the same set up as the g4s
grub
and do hey use the same set up as the g4s
grub
#7494
Tech Rookie
Hi,
I've been a G4S owner for some time and have really enjoyed reading through this forum. There are some really interesting characters posting on here and much of the information has been really helpful. The G4S is a great car and despite the G4+ now being available I will be sticking with the G4S.
Most of the issues that have been highlighted in this forum from when the G4S first became available I have experienced, e.g. clitching, clutch set-up, car set-up, receiver location, etc. But with all the help and advice from those contributing here on this forum I have managed to resolve these issues.
I have been running a Nova .12 LS3 but am looking to replace it with a JP Rex RT12S1 3P. Judging from what I have read there is a wide range of engines being used in this car and clearly everyone has their own preference.
I don't rate myself as a good driver so I won't be giving any accounts of my racing achievements but I do enjoy reading those from others here on this forum. Anyway just wanted to say Hi and also say thanks for all the helpful information and advice.
I've been a G4S owner for some time and have really enjoyed reading through this forum. There are some really interesting characters posting on here and much of the information has been really helpful. The G4S is a great car and despite the G4+ now being available I will be sticking with the G4S.
Most of the issues that have been highlighted in this forum from when the G4S first became available I have experienced, e.g. clitching, clutch set-up, car set-up, receiver location, etc. But with all the help and advice from those contributing here on this forum I have managed to resolve these issues.
I have been running a Nova .12 LS3 but am looking to replace it with a JP Rex RT12S1 3P. Judging from what I have read there is a wide range of engines being used in this car and clearly everyone has their own preference.
I don't rate myself as a good driver so I won't be giving any accounts of my racing achievements but I do enjoy reading those from others here on this forum. Anyway just wanted to say Hi and also say thanks for all the helpful information and advice.
#7495
G4S
Hi Gansei,
Are you planning coming to Australia in future? I think you would be more than welcome at our local track in Perth. G4S Superstar's always welcome!!
Are you planning coming to Australia in future? I think you would be more than welcome at our local track in Perth. G4S Superstar's always welcome!!
#7496
Tech Elite
iTrader: (10)
Hi,
I've been a G4S owner for some time and have really enjoyed reading through this forum. There are some really interesting characters posting on here and much of the information has been really helpful. The G4S is a great car and despite the G4+ now being available I will be sticking with the G4S.
Most of the issues that have been highlighted in this forum from when the G4S first became available I have experienced, e.g. clitching, clutch set-up, car set-up, receiver location, etc. But with all the help and advice from those contributing here on this forum I have managed to resolve these issues.
I have been running a Nova .12 LS3 but am looking to replace it with a JP Rex RT12S1 3P. Judging from what I have read there is a wide range of engines being used in this car and clearly everyone has their own preference.
I don't rate myself as a good driver so I won't be giving any accounts of my racing achievements but I do enjoy reading those from others here on this forum. Anyway just wanted to say Hi and also say thanks for all the helpful information and advice.
I've been a G4S owner for some time and have really enjoyed reading through this forum. There are some really interesting characters posting on here and much of the information has been really helpful. The G4S is a great car and despite the G4+ now being available I will be sticking with the G4S.
Most of the issues that have been highlighted in this forum from when the G4S first became available I have experienced, e.g. clitching, clutch set-up, car set-up, receiver location, etc. But with all the help and advice from those contributing here on this forum I have managed to resolve these issues.
I have been running a Nova .12 LS3 but am looking to replace it with a JP Rex RT12S1 3P. Judging from what I have read there is a wide range of engines being used in this car and clearly everyone has their own preference.
I don't rate myself as a good driver so I won't be giving any accounts of my racing achievements but I do enjoy reading those from others here on this forum. Anyway just wanted to say Hi and also say thanks for all the helpful information and advice.
Yes we all try new ideas here , you know engine combo's exhaust etc! The Nova LS3 is a great engine was used in many G4S at our local track and work with flying colours....!
i am sure if you test your new engine, i have heard great things and that there rather powerful! maybe check the engine section on reviews etc!!!
I think Gansei used one back in the days, he might have more info on this!
keep it up and enjoy this thread!!!
#7497
i am not superstar.. only G4S enthusiastic driver!!
i have no plan go to Australia
(i had a chance to go Australia to learn some educational session(IBM) in recent day. But i rejected. i don't like to go oversea alone)
But if Big event(IFMAR,FEMCA etc on) will be opened in Australia, i will go!!!
#7498
Tech Elite
iTrader: (10)
Hey Guys, made some changes tonight and also made up the intial setup for breakin engine and first test run!
quick question i meassure my wheel base from wheel thread nut to front and back each side!
correct me if i am wrong i have 260mm wheelbase is this correct measuremnts or am i doing or better yet meassuring from wrong section of car?
Also notice the rear flywing arms, the bottom spacers on fly wing arms pins is this the right area where to place spacers to adjust wheel base? "view image attached
cheers
quick question i meassure my wheel base from wheel thread nut to front and back each side!
correct me if i am wrong i have 260mm wheelbase is this correct measuremnts or am i doing or better yet meassuring from wrong section of car?
Also notice the rear flywing arms, the bottom spacers on fly wing arms pins is this the right area where to place spacers to adjust wheel base? "view image attached
cheers
#7499
Hey Guys, made some changes tonight and also made up the intial setup for breakin engine and first test run!
quick question i meassure my wheel base from wheel thread nut to front and back each side!
correct me if i am wrong i have 260mm wheelbase is this correct measuremnts or am i doing or better yet meassuring from wrong section of car?
Also notice the rear flywing arms, the bottom spacers on fly wing arms pins is this the right area where to place spacers to adjust wheel base? "view image attached
cheers
quick question i meassure my wheel base from wheel thread nut to front and back each side!
correct me if i am wrong i have 260mm wheelbase is this correct measuremnts or am i doing or better yet meassuring from wrong section of car?
Also notice the rear flywing arms, the bottom spacers on fly wing arms pins is this the right area where to place spacers to adjust wheel base? "view image attached
cheers
#7500
clutch activity movie..
Hi! G4S users and Daz..
this is my clutch activity test movie
i did same clutch setup what i suffered from UFO2 Shoe wear out in last weekend.
is it slip? is it too late meet?
it's only 0.3mm clutch gap..
please see the movie and give me advice.
http://tvpot.daum.net/clip/ClipViewB...able=undefined
this is my clutch activity test movie
i did same clutch setup what i suffered from UFO2 Shoe wear out in last weekend.
is it slip? is it too late meet?
it's only 0.3mm clutch gap..
please see the movie and give me advice.
http://tvpot.daum.net/clip/ClipViewB...able=undefined