squizzytaylor

The radio plate cost $85.00 I am expecting to pay 80-100 for the tensioner.
Oh I guess I was wrong, Im technically evil, that makes me the antichrist aaarrrrghhhhhhhhhhhhh 666 posts aaaaarrrghhhhhhhhhhhh

Satan

V-One S Racer

I'll get a Digital Camera !

V-One S

JUST ONE MORE POST SQuIZZ AND U CAN LEAVE HELL ALL ALONE!!!

squizzytaylor

Poor Sausage
Go back to your base settings and adjust from there, Im pretty sure your running an OS8 so thats cool. Remember that ambient temp/humidity can majorly change your tune and as such if you raced a couple of weeks ago it was 30Plus degrees with nearly no humidity, at the moment it is 20ish with 90% plus humidity
that is about as different in real terms as you can get.
All R/C shops should hold tuning workshops on a regular basis as part of thier service, Shit thats a good idea mmmm I might have to work on that idea further!!!!!!!!
Hows goin Luis?

gt (formerly known as satan)

xGSiR

What?!?
$80-100 for a Belt Tensioner?
Thats crazy.

V-One S

That was my prob squizzy, i was running in 30+ heat, dry as, then on race day we were running in the wet. We were wondering why we all had slicks.
We had a storm right at the start of nitro heat 1.
We had to wait 1 1/2 hours to start again, mind u that last half an hour i used to get my car running. it was being a major dog.
So the rain actually helped me get my car going.

So how much is a porta glow heater???

u know the little hand held ones with battery and heater tip all in one?

V-One S Racer

What a load of BS !

xGSiR

Where is everyone?!
Anyway.... here is what im going to buy:

1, VZ003 Front Suspension arm Set
2, FZ74 9MM Pillow Ball
3, 92012W 24MM 15 white spokes wheels ( 2 sets)
4, VZW018 Special Roll Bar Set
5, VZ022BK Black Uterane Bumper
6, VZ022BL Blue Urethane Bumper
7, VZW007 Carbon Upper Plate
8, 92050 V-One R Fuel Tank
9, 74901-14Bl Blue Clyinder Head GS15R
10, UM210 Clutch Shoe
11, 92415 Titanium Steering Turnbuckle
12, 92014-35 Kyosho V slick Tyres
13, 92014-40 Kyosho V Slick Tyres

Though V-One Racer is convincing me to get a new exhaust first and 2 speed >.<
Still thinkin' !

squizzytaylor

Yeah but this is what you get, it a little more than just a tensioner and its $80.00 not $100 sorry.

gt

xGSiR

That belt tensioner looks cool.
But yeah.... $80 damnit.

squizzytaylor

Glow warmers are about $30.00 with charger
Tamiya aerosol paints about $10.00

gt

squizzytaylor

[QUOTE]Originally posted by xGSiR
[B]Where is everyone?!
Anyway.... here is what im going to buy:

1, VZ003 Front Suspension arm Set
2, FZ74 9MM Pillow Ball
10, UM210 Clutch Shoe
12, 92014-35 Kyosho V slick Tyres
13, 92014-40 Kyosho V Slick Tyres
Though V-One Racer is convincing me to get a new exhaust first and 2 speed >.<

Thats all ya really need

gt

sausage_link

im running OS 8 plug

you see the thing i dont understand is it was running perfectly about 3 or 4 days ago and i havnt done anything but change the servo

now it wont even idle

wats wrong?


ive put my needle settings all back from normal and it still wont idle for more than 2 seconds even with the glow starter still on it dies

ive dont everything u guys have said and my bottom end is on stock settings

phildee

Whats better about this UM210 clutch?

squizzytaylor

There is NO such thing as stock bottom end settings!!!!!
Those settings are meant to be adjusted according to

1) temperature
2) humidity
3) fuel
4) High end adjustment
5) glow plug heat

All these factors will effect not only top end but bottom end as well. All your symptoms are indicative of low end richness.
Try taking your low end in 1/16 of a turn at a time until it runs without stalling, it should load up after about 7-8 seconds.Then play with your top end if required but remember your top end adjustment will also effect your bottom end slightly so it may take a few runs to get it just right.

gt