R/C Tech Forums - Serpent 710

R/C Tech Forums (https://www.rctech.net/forum/)

- Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)

- - Serpent 710 (https://www.rctech.net/forum/nitro-road/27070-serpent-710-a.html)

Quote:

Originally posted by Marcos.S710
(using the latest Monotuning products:header gasket,fuel line and foam tires)

Hey Marcos, I see that those look a lot like Speedmind dish wheels. Are they Monotuning?

Quote:

Originally posted by GoldFinger
Bro, we can share the car setup but we can not share the joy and too much laughter we had.
Check it out...

Cool. I really wanted to drive at JITC. Looks like a really cool track to drive especially with a 710. Please let me know if any major races are coming up there.

Ummm, about my "weapon"... I don't think I can compare mine to this one below...:sneaky: :D

http://www.daltonshop.com/images/gqc..._s710final.jpg

Quote:

Originally posted by InitialD
Hey Marcos, I see that those look a lot like Speedmind dish wheels. Are they Monotuning?

look very careful they are Monotuning(see the spokes) !! is the reflection of the flash. I do not use anything but Monotuning tires!!!!:D

thats one hoped up snake:eek:

Quote:

Originally posted by FW05R
thats one hoped up snake:eek:

:nod: :nod:

Quote:

Originally posted by InitialD
Cool. I really wanted to drive at JITC. Looks like a really cool track to drive especially with a 710. Please let me know if any major races are coming up there.

There is Jakarta Open, end of Jun or mid of July.
Still Temptative, coz the president election (campaign).
Will let you know soon .

Quote:

Originally posted by InitialD

Ummm, about my "weapon"... I don't think I can compare mine to this one below...:sneaky: :D

That is the Mother of Snake.

Quote:

Originally posted by InitialD
Nice.:) But I think your "other" car is nicer.:sneaky: :lol:

Just a biased opinion from me.;) :lol:

This is what I admire Lord D the most.. If I were the Serpent Owner, I will offer whatever amount you asked for to be willing taking place as Marketing Director:nod:

Quote:

Originally posted by FW05R
thats one hoped up snake:eek:

That`s my 4th S710.. I`m getting a little bored now as it become less of what more could be done including those all boca ceramics bearing that Goldfinger force me to use. Just for info: 3 racing quality, no doubt, is good. Just the fitment (proper dimension) is the most area that need attention.

Oh yes D, the most unsafe driver (smoking), indeed is `him`.

Quote:

Originally posted by InitialD
Cool. I really wanted to drive at JITC. Looks like a really cool track to drive especially with a 710. Please let me know if any major races are coming up there.

Ummm, about my "weapon"... I don't think I can compare mine to this one below...:sneaky: :D

http://www.daltonshop.com/images/gqc..._s710final.jpg

Nice Snake Blade there!!! :nod: Who' is it?

Quote:

Originally posted by KevinS
DOH!

I wanted to ask him if I could buy that MRX-4 for $75.

:lol: :lol: Now it's mine! :D :lol: :lol:

Quote:

Originally posted by PSI Racing
Thanks Mark.
Is that "D's" real name?
Maybe we might finally uncover the man behind the mask.

Obviously we can't possibly comment on the allegations of D's name, i.e. "you may very well think that, but I couldn't possibly comment" :sneaky: :lol: :lol:

Quote:

Originally posted by Pyramid
This is what I admire Lord D the most.. If I were the Serpent Owner, I will offer whatever amount you asked for to be willing taking place as Marketing Director:nod:

Don't worry. I'll be a cheap MD.:lol: :lol: :lol: Will work for free RC.:lol: :cry:

Quote:

Originally posted by Pyramid
Oh yes D, the most unsafe driver (smoking), indeed is `him`.

:eek: :lol:

http://www.daltonshop.com/images/gqc...mainAstart.jpg

Quote:

Originally posted by InitialD
Hey Mark. Sorry for the incident. :( Strange that the controller did not go into fail safe mode.:confused: A same incident happened to a friend of mine at our local track. The crystal on the receiver loosened out but the car went into fail safe mode and the throttle / brake servo was locked. That was on the 3PK. But I would gather that it would work the same on the 3PJ that you're using. Are you by any chance using Futaba receivers? I thought I remember you mention that you're using something else for the receiver... Perhaps that's why the fail safe did not kick in or supported...

You can try bending it. But if it was me, I'll look at the place where the chassis bent. If it's at the nose BEFORE the first screw mounting where the front bulkheads are secured, then it will not tweak the chassis as a whole. Well, if you leave it, it'll be OK I guess. It'll just be ugly.

If the bend is somewhere in the middle part where the front bulkhead is screwed and mounted, there is a chance that the front part will be tweak.

The Rx on my 705 isn't PCM - big mistake, but I was young and innocent .... ok younger!
I'm going to order one to avoid this happening again.

Yeah, it bent just after the last non-bumper retaining screws on the chassis, so it is just the very tip - a hit with a hammer should do the trick :eek: :lol:

Quote:

Originally posted by InitialD
Cool. I really wanted to drive at JITC. Looks like a really cool track to drive especially with a 710. Please let me know if any major races are coming up there.

Futaba Jakarta Open, conform schedule on July 10-11 with as of today conform 33 International drivers from Brunei, Singapore including Hobby Link owner, Thailand including Surikarn and Suruth, and other neighboring countries. Dont miss it and do register as early as possible.