|
Originally posted by InitialD What tires are you using? Offset ones? Which roll center are you using? UBO/LB? I believe you would need to tighten the top rear pivot ball to the max and then set the rear camber / toe in. The minimum trackwidth I measured was 197 mm I believe. If you have different left and right rear camber, your top rear pivot ball would be screwed in differently. If you still cannot get to the rear trackwidth, then just get the most minimum that you can get. Watch the rear dogbones. Make sure that it does not bind. |
Originally posted by InitialD That's a sleek paint design ! Bravo.:nod: You come out with the best alternative bodyshell designs.:nod: :lol: Originally posted by rwisejr Nice paint job dude I like the layout.:) |
Originally posted by hudy i think that all the snakes will get tamed by the new v one rrr:sneaky: I am becoming annoyed, not just at the repeated comments, but at having to filter out all of the unneccessary posts when reading this thread. |
Originally posted by InitialD You're planning to race there too?:confused: :sneaky: |
Originally posted by hudy i think that all the snakes will get tamed by the new v one rrr:sneaky: |
Originally posted by kreidel Ellegi white spoked rim and Yes...I am using UBO/LB. I can get it to 199mm but that has the top smashed together....will that affect it at all? I'll go home and check. I remember I got it at that trackwidth. What rear camber do you run? |
Originally posted by InitialD OS carbs?:confused: Why? I think they are they smallest carbs. Not enough for Nova based engines. STS carbs are close to ideal because STS engines work about the same as Nova engines. But one thing I found about STS carbs are that they are composite and not aluminum like Nova. |
Originally posted by InitialD The top pivot balls should not smash together with the top arm. Else, they will bind. I'll go home and check. I remember I got it at that trackwidth. What rear camber do you run? I use UBO/LT with 4 deg rear camber, must cut the top arm almost 1.5mm to gain 199mm trackwidth (with GQ tires) |
Originally posted by Pit-racer True. I will be testing w/ a nelson plug this weekend, instead of the turbo. |
Originally posted by GoldFinger Just as a note. I use UBO/LT with 4 deg rear camber, must cut the top arm almost 1.5mm to gain 199mm trackwidth (with GQ tires) UBO / LT gives a pretty high rear roll center. How do you like it? |
Originally posted by Sow&Steady Ah, that means you created your own personal album and uploaded them there! :D |
Originally posted by hudy i think that all the snakes will get tamed by the new v one rrr:sneaky: |
Originally posted by InitialD You're planning to race there too?:confused: :sneaky: |
Re: Re: Nice shell
Originally posted by Diesel Racer Cheers Voodo_Magic, it's Tamiya PS-41 Bright Silver. |
Originally posted by JustRace How's this for a pit babe? She's got that snake in her hands. http://www.mytsn.com/publ/psimage.as...=10074&psid=10 http://www.mytsn.com/publ/psimage.as...=10074&psid=10 Just how we want them to be ... as long as they don't race against us !?*# :sweat: |
| All times are GMT -7. It is currently 04:26 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.