How's this for a pit babe? She's got that snake in her hands.

http://www.mytsn.com/publ/psimage.as...=10074&psid=10

http://www.mytsn.com/publ/psimage.as...=10074&psid=10

now...thats a nice pink color :lol: :lol: :lol:

:nod: :nod:

Cool, this snake would never overheated.
It has a very big "twin-heatsink" !!:spidey:

:eek: :nod: :D

InitialD,

When you say 4mm under on your setup sheet is that the lowered, middle, or raised? And 1mm caster is all the shims to the rear except the smallest one?

and again, its a double pink heatsink :lol: :lol: :lol: :cry: :cry: :lol:

Great pair of snakes there! :eek:

That's the lowest roll center setting for the front. Front upper arms are raised with 2+2 mm shim below the arms.

I actually just wanted to try it out and it felt OK. I'm wanting to try out the highest roll center setting (as what I have in my diff setup) with the solid front. I think it will make the car more responsive in the front. I found the car (with front diff) to be very nice in the chincanes with a high front roll center.

Yup. Play around with it. Sometimes I use 1 mm or sometimes I use 2 mm. If I use a lot of caster, I get a lot of on power steering. Too much coming out of the corner that the rear end goes wild. Well, the less caster also helps in the turn in of the sharp corners.

:nod: I'm getting 8min. + on a tank under race conditions and still testing.

Damn. Is that a Novarossi 52606 pipe?;)

Are those Palmaris is still using Nova carb ?

what engine is that? looks like the Palmaris engine heatsink :eek:

nice 710!:nod:

It is the RB Concepts pipe which is about the same as nova tp06

We are testing between the 2- sts and nova carbs.