|
Originally posted by BaxterC Lovely, thank you. What would you suggest for the receiver pack, I have a wall charger for them, bet you only get about 80% charge from them. I am sure that the starter will run for months on those packs. - 5 cell packs 700-1100mAh (receiver and xray m18) - 8 and 9 cell transmitter packs 1800-2250mAh - 6 cell starterbox packs 3000mAh - 12V accu 7200mAh (other cars starterbox) - 1.2V glowplug igniter It's not a fast charger (ports: 2x 60mA, 1x 140mA, 1x 180mA and 1x 500mA), but it can charge everything. I have 2 of em (about 25 Euro each), so I can charge two 3000mAh packs in 6-7 hours at 500mAh. As for those 3300 packs in the starterbox... they will last closer to a single weekend. :cool: |
Re: Engine + Pipe
Originally posted by markp27 Does anyone know if the TP06 is a good combination for the JP FX12 T03? Why not take the Novarossi NSR12? |
Originally posted by KevinS It starts at 500mA. |
Re: Re: Re: Re: Race tracks in India - Pakistan
Originally posted by BaxterC Well, I have note had much time, but I have built the front and the front middle shaft, but not the front one-way as it is missing the pulley which is on it's way. I was about to start the rear diff, but not at 11pm, I will do the diff tomorrow and RUN-IN MY MOTOR!!!:D I cant wait.... Have you had your follow-up meeting yet? How is your car going, been able to race lately? hows the house coming? Finished I hope. It is a big job. |
Originally posted by BaxterC Hey, GOOD LUCK!!! I take it you like the Monotuning Tyres |
Originally posted by BaxterC Nevermind, Question already answered... Slow and silly me. |
Originally posted by InitialD Why would you want to charge your receiver packs at a lower rate? 500 mAH would be ideal. A lot of more complicated and expensive chargers can only handle packs with certain numbers of cells, so I think my simple chargers are ideal. But it's all in what one prefers... |
Originally posted by Marcos.S710 hopefully i will win!!and i will post pictures!:D |
Re: Re: Engine + Pipe
Originally posted by InitialD :eek: :sneaky: Why not take the Novarossi NSR12? |
Re: hi guys!
Originally posted by Serpent Nut! im just really curious what would be the best fuel? meaning great power and has good lubrication not that corrosive... hhhhmmm what you guys think?:cool: http://www.maxysfuel.com/images/profuellogo2.jpg |
Originally posted by JustRace Marcos...how much is it to race this weekend? Also...do you know if FTS opens on Saturdays for regular practice (on non race weekends). Thanks. |
Re: hi guys!
Originally posted by Serpent Nut! im just really curious what would be the best fuel? meaning great power and has good lubrication not that corrosive... hhhhmmm what you guys think?:cool: |
Re: Re: hi guys!
|
Originally posted by InitialD Why? Wouldn't that cause engine tuning problems? As for the pipe, you may want to try a Novarossi / Novamega manifold that comes with their inline pipe and pair it up with yout RDLogic pipe. Makes the overall pipe shorter. Very good on long high speed tracks.:nod: I could make an extra hole in the radioplate next to the tank, closer to the fuel filter. That would take up to 3" off without touching the side belt. As for the manifold; would Novarossi 40603 work? The local track here is more of a medium track, not nearly as fast as MACH Heemstede, but I want to try everything. Originally posted by InitialD :lol: :lol: :lol: What are you waiting for? Go kick some ass.:nod: :lol: |
Originally posted by KevinS No tuning problems so far, during break-in... Maybe when I lean it out more. I must say the RS12T5 on my 705 was a b**** to tune with the same length, never figured it could be the fuel line... What is the longest you would go with a fuel tube? I could make an extra hole in the radioplate next to the tank, closer to the fuel filter. That would take up to 3" off without touching the side belt. As for the manifold; would Novarossi 40603 work? The local track here is more of a medium track, not nearly as fast as MACH Heemstede, but I want to try everything. :cry: :cry: Same situation Mark is in... :cry: :cry: |
| All times are GMT -7. It is currently 11:41 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.