Rc10ntc3
#2401
Registered User
I saw the airfliter system many months ago and made them myself. Anytime you can get clean and cooler air, it has to help! I now use the center exhaust deal and have had to move the air system to the left side of the car and close to the rear tire, not as good as down the right side but better than that hot air straight behind the head.
#2402
Tech Adept
AE is good and Also the new Ofna Starter box cuz Ofna is a Copy of everycompany
http://ofna.com/images/start-multi.jpg
http://ofna.com/images/start-multi.jpg
#2403
Tech Initiate
I just got the AE box and added a 12v gel cell for power. Works great and is adaptable for other cars as well. Hard to beat at $69.95 plus $22.95 for the battery.
#2404
Originally posted by NTC3NUT
I only used the upper case covers, but they worked great. I did have to remove a little material from my carbon corner braces due to the aluminum cases being a little thicker than the plastic cases, but I didn't have to reshim anything, and everything bolted right back into place perfectly. If you have the painted versions, you may have to remove the paint on the bearing races for proper clearance, just scrape it off, or use a wire wheel on your dremel. You may also want to run a 4/40 tap thru the holes, a few of them had a slight bit of paint in them also. All in all, 100% satisfied, you can not beat this stuff for the money. I will put the shock towers on just to see how they fit, and I'll let you guys know.
I only used the upper case covers, but they worked great. I did have to remove a little material from my carbon corner braces due to the aluminum cases being a little thicker than the plastic cases, but I didn't have to reshim anything, and everything bolted right back into place perfectly. If you have the painted versions, you may have to remove the paint on the bearing races for proper clearance, just scrape it off, or use a wire wheel on your dremel. You may also want to run a 4/40 tap thru the holes, a few of them had a slight bit of paint in them also. All in all, 100% satisfied, you can not beat this stuff for the money. I will put the shock towers on just to see how they fit, and I'll let you guys know.
#2405
Does any body know if these tyres will fit on the NTC3?
Fast Tires - Front 26mm 1:10 DTM Mousse for Mugen
Fast Tires - Rear 30mm 1:10 DTM Mousse for Mugen
Or do i use these (Are the for electric?)
FT-REAR30 Fast Tire - Rear, Wide
Fast Tire - FRONT
Other wise, what tyres do i use to help reduce understeer?
Fast Tires - Front 26mm 1:10 DTM Mousse for Mugen
Fast Tires - Rear 30mm 1:10 DTM Mousse for Mugen
Or do i use these (Are the for electric?)
FT-REAR30 Fast Tire - Rear, Wide
Fast Tire - FRONT
Other wise, what tyres do i use to help reduce understeer?
#2406
Brett, They are painted, not anodized. It looks very nice, but it does need to be removed from some of the tighter fitting spots & the threads, no big deal. I got 2 sets, the other set is unpainted and I have begun polishing them. They take a polish very well, looks like chrome in no time! After I polished the upper cases I had second thoughts about using the painted ones. Still a great buy.
#2407
Originally posted by rfree02
Does any body know if these tyres will fit on the NTC3?
Fast Tires - Front 26mm 1:10 DTM Mousse for Mugen
Fast Tires - Rear 30mm 1:10 DTM Mousse for Mugen
Or do i use these (Are the for electric?)
FT-REAR30 Fast Tire - Rear, Wide
Fast Tire - FRONT
Other wise, what tyres do i use to help reduce understeer?
Does any body know if these tyres will fit on the NTC3?
Fast Tires - Front 26mm 1:10 DTM Mousse for Mugen
Fast Tires - Rear 30mm 1:10 DTM Mousse for Mugen
Or do i use these (Are the for electric?)
FT-REAR30 Fast Tire - Rear, Wide
Fast Tire - FRONT
Other wise, what tyres do i use to help reduce understeer?
The DTM Mousse is a multi purpose rim by GRP that fits all makes of touring car. So they should fit the NTC3 just fine.
#2408
Tech Regular
Where can I get some prepainted bodies for the NTC3
#2409
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
#2411
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
#2412
Tech Regular
BLeh... I need something with more downforce. any hook ups?
#2414
Tech Regular
I wantsomething like this.........
http://www.teamassociated.com/racerh...rHernandez.jpg
Cant seem to find it.
http://www.teamassociated.com/racerh...rHernandez.jpg
Cant seem to find it.
#2415
DOWNFORCE !!!!
Originally posted by simonfdr
I wantsomething like this.........
Cant seem to find it.
I wantsomething like this.........
Cant seem to find it.
You mean something like this......
We have two Hobby Town USA here in the Kansas City area, these types of bodies are stocked at both stores
Last edited by racecar850; 10-11-2008 at 01:29 PM.