R/C Tech Forums - Xray NT1

Hey guys, what adjustment will help the front end of my car dive into a turn on a tight track? My track is small with a lot of turns. My car used to do it, now all of the sudden it stopped. Here is my set-up:

40 fr 42 rear
1 1/2 fr camber
1 degree tow out
the lowest roll center
450 shock oil
dark blue springs
front lock
smallest caster clip in the fr, and the two bigger ones closer to the steering servo
1mm droop

3 1/2 tow in
-3 camber
red springs
500 shock oil
50k rear diff
lowest roll center
2.0 sway bar
4mm droop

Any help would be appreciated!!!

Dismantle the car...and fix it back ....u'll b surprised....if it used to handle well and not now...something must be wrong...like car treak, suspension pin bent, shocks not working...

meronr

01-06-2008 06:51 PM

Quote:

Originally Posted by Serpent-Dan (Post 4044935)

Superiorhobbies or Ashford hobby nexus doesn't have the 08 anymore in stock

i just looked and superior has only two left i think and the price is still 399.95 wich wont last from what i hear the xray line is going up in price. Euro still kicking Dollars butt and it isn't helping any of us here in the states who love this hobby:eek:

Serpent-Dan

01-06-2008 09:09 PM

for 399.99 that is the 08 kit. If you want it get fast.:nod:

aznrevlazn

01-06-2008 10:16 PM

man, it's items like this i wish was on towerhobbies. I wish there was a site that had every rc and hop-up i needed on one single site instead of just the conventional items.

Michael_T

01-07-2008 03:27 AM

2 Attachment(s)

I've built many cars over the years (on, off, elec, nitro), the NT1 is the most impressive. It has by far the most efficient drivetrain of the nitro cars I have built and the quality of parts is outstanding!

I will post some build photos as I go [as I was searching for build pic's before deciding on the car and couldn't find any anywhere:) ]

B4	01-07-2008 03:50 AM

Quote:

Originally Posted by Novarossi (Post 4047190)

Hop on over to 3hobby you will find an excellent build guide to the NT1.

Osiris 75

01-07-2008 07:26 AM

Thanks guys, I will try these recommendations.

romuald31

01-08-2008 01:33 AM

Hello from France,

here's a full review of my NT1

http://www.automodelisme.com/modules...wtopic&t=25415

jaykay

01-08-2008 02:06 AM

I´m just working on my personal website: www.xracer.org

It will be a journal about rc/racing here in germany. I will also publish some build reports.

TomB	01-08-2008 02:13 AM

with the alloy shocks do you use 3 rubber o rings or two on the bottom cup?
what works better? and does the 3 o rings provide too much friction?

Michael_T

01-08-2008 01:54 PM

Glad I bought my 08 NT1 when I did, prices have gone up around $60US:eek:

Serpent-Dan

01-09-2008 07:13 PM

So I guess for Xray giving cvd's they take away your setup wheels and place a big sticker on the box saying NO WHEELS:sneaky:

Michael_T

01-09-2008 07:48 PM

Quote:

Originally Posted by Serpent-Dan (Post 4057647)

So I guess for Xray giving cvd's they take away your setup wheels and place a big sticker on the box saying NO WHEELS:sneaky:

Yes, correct.

One thing I did notice in my new kit is a totally different side belt. No Xray marking on it, slighty thicker, and a very shiny coat compared to the other belts. Something to do with this maybe... http://forum.teamxray.com/viewtopic.php?t=6151

All times are GMT -7. It is currently 08:28 PM.

Page 156 of 508

156

Show 40 post(s) from this thread on one page