R/C Tech Forums - Tekno NB48

Pete is right. While technically they will 'fit' the current buggies (NB48 and EB48.2) youd need the new rear hubs and extenders and some other small parts from the SL kit to really get it to work correctly.

From what it looks like this will be the case. I think the aluminum rear hubs Bornhorst and Lutz have been running were made to fit either, but don't qoute me on that.

Even if you made the hubs and extenders fit, the SL arms still would not yield the same geometry. The SL arms are the narrow width parts like the SC truck.

Carter Flotron

05-04-2015 10:35 AM

Quote:

Originally Posted by MX304 (Post 13992529)

Even if you made the hubs and extenders fit, the SL arms still would not yield the same geometry. The SL arms are the narrow width parts like the SC truck.

I know :nod: I didn't say it would work well. They have the ability to be installed on the car, but they wont handle well at all or be worth it in any sense.

slakr

05-12-2015 10:50 AM

So where are all the NB48's (out of stock)? Is there a new buggy coming out or something?

WonTonsChicken

05-12-2015 11:00 AM

Quote:

Originally Posted by slakr (Post 14005366)

So where are all the NB48's (out of stock)? Is there a new buggy coming out or something?

Very possible..

MX304

05-12-2015 12:12 PM

Quote:

Originally Posted by slakr (Post 14005366)

So where are all the NB48's (out of stock)? Is there a new buggy coming out or something?

Updated buggy coming out. Looks to be 2-3 months out.

Hoese37

05-13-2015 06:33 AM

https://www.google.com/shopping/prod...AYWjsAWL9IGIBw some available here.

jt409

05-16-2015 06:53 AM

I ordered a set of truggy shocks, towers and some springs if anyone who has already modded there arms would be willing to post some pics Iit would be very appreciated. :D

segreda

05-19-2015 07:26 AM

So when are the New parts coming out???
Any Word tekno?

qstorm777

05-21-2015 11:52 AM

Quote:

Originally Posted by blacktop20valve (Post 13535106)

its all direct fit, the guide just makes the rotor more straight, i used a spring instead of a fuel tubing as seen on the pics, its more consistent, coz the tubing gets softer when its hot, the spring came from a D8

I know I'm responding to an old post and on the buggy thread, but I have a NT48 and one of the brake pads came off the metal piece. I'm assuming the Kyosho brake setup will fit the NT48. Anyway, did you just buy the brake pads and disk or did you have to buy the pad mounting posts too? What brake disc guide is that? I'm interested it that too. Thanks.

nmdesertracer

05-21-2015 06:32 PM

One of the best upgrades for the brakes!
TKR5206 brake discs
TKR5214 brake pads
TKR5215B 10° Offset Steel Brake Cam

FastPete

05-21-2015 07:20 PM

Quote:

Originally Posted by nmdesertracer (Post 14020135)

One of the best upgrades for the brakes!
TKR5206 brake discs
TKR5214 brake pads
TKR5215B 10° Offset Steel Brake Cam

+1 did it to mine also works great!

qstorm777

05-21-2015 09:20 PM

Quote:

Originally Posted by nmdesertracer (Post 14020135)

One of the best upgrades for the brakes!
TKR5206 brake discs
TKR5214 brake pads
TKR5215B 10° Offset Steel Brake Cam

Really? Cheaper too. How long does the fiberglass discs last? How do they compare to stock?

8ight-e

05-21-2015 09:55 PM

is there any way to make the nb48 turn like my eb48.2?

Carter Flotron

05-21-2015 10:03 PM

Quote:

Originally Posted by 8ight-e (Post 14020385)

is there any way to make the nb48 turn like my eb48.2?

Can you post your setup? I run pretty much the same setup for both cars.

8ight-e

05-21-2015 10:08 PM

Quote:

Originally Posted by Carter Flotron (Post 14020392)

Can you post your setup? I run pretty much the same setup for both cars.

I don't have it in pdf, it was based on one of Joe's. Do you have a copy of your setup? I was thinking of using one of Ryans as a base, but his are pretty old.

All times are GMT -7. It is currently 01:11 AM.

Page 223 of 236

223

Show 40 post(s) from this thread on one page