|
1 Attachment(s)
Another thumbs up for this buggy!
Built mine 2 days ago, raced it today (haven't drove a nitro buggy in two years) finished 5th in the A today. Stock setup except for 6x1.5 pistons. Indoor clay. Build was typical Tekno flawless. Cant wait for spring to get it outside! |
Anybody know if they're coming out with an updated NB48? If you go on their website and let it scroll through automatically it's the only kit missing unless you go under kits or scroll all the way down it's there, but on the main page it's not on there?
|
Originally Posted by RC-ZOMBIE
(Post 13758929)
Anybody know if they're coming out with an updated NB48? If you go on their website and let it scroll through automatically it's the only kit missing unless you go under kits or scroll all the way down it's there, but on the main page it's not on there?
|
Originally Posted by FastPete
(Post 13758945)
I highly doubt it. Its on the main page for me.;)
|
So, i think its time to ask here:
NB and EB owners, please help :) I have both buggies and two sets of CNC shock pistons: 6x1.5 and 8x1.3. Which one i should place into EB and which one should go into NB? Tracks here ususally med to high bumps, small jumps and many 180 turns. |
Originally Posted by vandalzzz
(Post 13759369)
So, i think its time to ask here:
NB and EB owners, please help :) I have both buggies and two sets of CNC shock pistons: 6x1.5 and 8x1.3. Which one i should place into EB and which one should go into NB? Tracks here ususally med to high bumps, small jumps and many 180 turns. Either work well. Im sure you could use all 8x1.3 also just have to adjust your weight of oil. |
Good looking car
|
does this battery work on the buggy? anybody using it? can foam be added to prevent movement?
http://www.amain.com/reedy-flat-li-p...200mah/p268575 thank you. |
Originally Posted by brmena101
(Post 13761161)
does this battery work on the buggy? anybody using it? can foam be added to prevent movement?
http://www.amain.com/reedy-flat-li-p...200mah/p268575 thank you. |
Originally Posted by FastPete
(Post 13759514)
By me indoor or outdoor track. We run all 6x1.5 or 8x1.3F 8x1.4R
Either work well. Im sure you could use all 8x1.3 also just have to adjust your weight of oil. -- One more question about shocks: what is the best way to polish stock shaft? Dremel with special bit and paste works ok? |
Originally Posted by vandalzzz
(Post 13761604)
what is the best way to polish stock shaft? Dremel with special bit and paste works ok?
http://www.tytessman.com/racing/tips...oth-shocks.php Regards, |
What are the chances Drake signs with Tekno. With Lutz and Drake that would be a solid 1-2 punch.
|
0, Zero, Zilch, Nada
|
What fuel tubing are you using to replace the kit fuel tubing? What brand is the same size in OD and ID as what comes in the kit?
Thanks - Jim |
Originally Posted by vwduud
(Post 13784052)
What fuel tubing are you using to replace the kit fuel tubing? What brand is the same size in OD and ID as what comes in the kit?
Thanks - Jim This is what I use and it is great fuel line. Comes in a plethora of colors and is available at most hobby shops. http://www.amain.com/du-bro-nitro-li...ue-61cm/p13003 |
| All times are GMT -7. It is currently 03:56 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.