You can't use the Noble on the RTR. Your options are the stock TX (kt531) or the Kt432.

I am still running the April layout with my Box Stock... I will be excited when I can get 1 lap at the average time of some of you.

lol I unbackordered the rtr and have an evo on the way. Should be good for stock when my white body gets here.

I definitely understand that feeling. Some days I can only get in 20 minutes of track time and others I manage over an hour. It feels like every day the movements become more automatic and I am able to get better times with less intense focus.

but yeah some of these averages being put up are really impressive. I know I have my work cut out for me haha.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Hello All,
Only had 6 drivers last month, but because they took the time to post results I decided to compile them. Hope participation will pick up soon.

Box Stock
4th-MileHighRC- 339.6s/3.79s
3rd-TomtheGeek- 326.0s/3.76s
2nd-FastJew- 300.0s/3.67s
1st-Traveler- 276.7s/3.43s

Porsche Cup
2nd-MilehighRC- 335.9s/3.96s
1st-Traveler- 281.2s/3.49s

Stock Class
3rd-MilehighRC- 320.2s/3.76s
2nd-Medo998- 266.1s/3.29s
1st-Traveler2- 259.0s/3.23s

Pro Stock Class
1st-Traveler- 258.7s/3.28s

Open AWD Class
1st-Chemnut220- 341.2s/4.08s

FTM goes to Traveler and his Stock car with a 3.23 fast lap.

Cheers,
Traveler2

Anyone have initial times on the May layout?

I am averaging 4.2s with only one lap under 4s, with a Stock class setup.

I took my “stock class” car and slapped a wide lexan body bumper on it to protect the front end. I did this because the post office may have lost the body I ordered and I just wanted to run some laps. After a ton of runs I managed a 283.28/3.43 run. It won’t count for stock class until I can (hopefully) reproduce it when my McLauren body finally arrives (if it does at all...). I will attempt to 3D print an R8 shell with ABS if I don’t get the body by this weekend. It will be ugly I’m sure....

for open AWD - I’ve logged a 275.34/3.30 with the BZ3. I put a 3500 kv motor in it (replacing the 7000) and it runs a lot cooler and I get 3 runs per pack instead of 2...

If others wish to post their times, I will leave that to them but I know on FB, some have reported times from the 260’s to the low 300’s.

what setup are you running for the stock car?

Do we have an official layout for May? Anyone heard from Jim, hope he is well.

The official layout went out in the Facebook page - but not here.

Yes. Jim is ok and hope he’ll be back soon. He asked me to fill in for him and I’ve asked LuckLou to back me up. Thanks ChemNut for posting the layout here for those not on FB.

Class- Box Stock
Date- 31-May-2021
Location- Redondo Beach, CA USA
Race Time- 268.061
Fastest Lap- 3.267
Chassis- Kyosho MR03 RWD
Body- Audi R8 LMS
Wheelbase- 98mm
Tires- (F) Kyosho 30 Deg Slick, (R) Marka V1 10 Deg Slick
Motor- Kyosho Stock
Batteries- PN 750 mah
Front Springs- PN Red
T-Plate- PN Carbon 3
Motor Mount- Stock MM
Dampener (If applicable)- Stock
Dampener Fluid (If applicable)- N/A
Gearing- 7T/Stock Diff
Notes- Car drives well. Did not spend enough time this month. Setup will be a good baseline for June.

Class- Stock
Date- 31-May-2021
Location- Redondo Beach, CA USA
Race Time- 242.209
Fastest Lap- 3.153
Chassis- PN 2.5W
Body- Kyosho Audi R8 LMS
Wheelbase- 98mm
Tires- (F) Kyosho 30 Deg Slick, (R) PN KS Super Soft Radial
Motor- PN 3500 kv
Batteries- PN 750mah
Front Springs- PN v4 AA blue
T-Plate- PN G10 3
Motor Mount- PN v5 LCG
Dampener (If applicable)- PN dsd (green/green)
Dampener Fluid (If applicable)- N/A
Gearing- PN 64P LSD 53/10
Notes-

Initial run was 4 min 31 sec - PN AA v3 green front springs, PN G10 5 T-plate
1st setup change from PN 64P 53/14 to 53/10 - 4 min 23 sec
2nd setup change to current less PN v4 AA front suspension - 4 min 11 sec
3rd setup change to current - 4 min 6 sec
4th setup change - changed body from Kyosho Mclaren 12c to Kyosho Audi R8 LMS

Car was happy at 3.1xx/lap. Had several bad laps on submitted run. Could have been sub 4 min.

Class- Porsche Cup
Date- 28-May-2021
Location- Redondo Beach, CA USA
Race Time- 255.438
Fastest Lap- 3.169
Chassis- Kyosho MR03 EVO
Body- Porsche 911 GT3 RS
Wheelbase- 90mm
Tires- (F) Kyosho 30 Deg LH slick, (R) Marka V1 10 Deg slick
Motor- PN 3500 kv
Batteries- Kyosho SpeedHouse 800 mah
Front Springs- PN purple
T-Plate- PN G10 5
Motor Mount- PN reconfigurable carbon
Dampener (If applicable)- PN dsd (green/green)
Dampener Fluid (If applicable)- N/A
Gearing- PN 64P LSD 53/10
Notes- Changed from Nexx RM to PN configurable carbon motor mount
On this layout, there were days that I felt like this would be my submission for the stock class.
Car can be driven harder.

Class-Box Stock
Date-5/24/21
Location-Winston-Salem, NC
Race Time-260.297
Fastest Lap-3.157
Chassis-MR-03 ASF
Body-McLaren F1 LM
Wheelbase-98mm
Tires-K30LH fronts, Marka V1R10 rears
Motor-Stock
Batteries-TRP 747s
Front Springs-Kyosho Orange
T-Plate-Kyosho Carbon Med
Motor Mount-Stock MM
Dampener (If applicable)-None
Dampener Fluid (If applicable)-K 15k grease on top shock
Gearing-Stock Gear Diff/7T pinion
Notes-No changes this month, car transitions quickly and is easy to drive.

Class-Porsche Cup Class
Date-5/30/21
Location-Winston-Salem, NC
Race Time-265.546
Fastest Lap-3.153
Chassis-MR-03 EVO
Body-911 GT3
Wheelbase-90mm
Tires-K30Flat fronts, Marka 10 rears
Motor-ATM 3500
Batteries-Kyosho SpeedHouse 800s
Front Springs-Kyosho Stock
T-Plate-Kyosho FRP 0.6S
Motor Mount-Nexx Round RM
Dampener (If applicable)-PN G10 DDS and Kyosho Inner Tube Shock MZW442
Dampener Fluid (If applicable)-1300 Silicone Oil
Gearing-PN 64p 13/53 Ball diff
Notes-No changes from last month. Only a couple of runs on 5/30. Challenging but fun to drive.