NEW XRAY T2
02-06-2006, 11:42 PM
#2881
Tech Initiate
Hello
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
02-07-2006, 02:42 AM
#2882
my bad
02-07-2006, 02:51 AM
#2883
Originally Posted by lbckevin
Chris08527,
Team drivers and any driver entering a big sanctioned race must be at min. weight. Drivers add the weight to be legal and place the weight to balance the car.
Team drivers and any driver entering a big sanctioned race must be at min. weight. Drivers add the weight to be legal and place the weight to balance the car.
yes i understand that about a min. weight, i am wondering if maybe the car is a little naturally unbalanced and people are not adding weight to one side and maybe they are actually tweaking the car on a hudy/mip/scales so it is "not tweaked" and then after a run one small hit or something and the car goes back and now it is "tweaked"
sounds funny i know but i think you understand what i am trying to say
my original question
"how many of the people that had these "tweak" issues were adding weight to the car???
02-07-2006, 06:04 AM
#2884
Tech Apprentice
Originally Posted by Chris08527
ibckevin
yes i understand that about a min. weight, i am wondering if maybe the car is a little naturally unbalanced and people are not adding weight to one side and maybe they are actually tweaking the car on a hudy/mip/scales so it is "not tweaked" and then after a run one small hit or something and the car goes back and now it is "tweaked"
sounds funny i know but i think you understand what i am trying to say
my original question
"how many of the people that had these "tweak" issues were adding weight to the car???
yes i understand that about a min. weight, i am wondering if maybe the car is a little naturally unbalanced and people are not adding weight to one side and maybe they are actually tweaking the car on a hudy/mip/scales so it is "not tweaked" and then after a run one small hit or something and the car goes back and now it is "tweaked"
sounds funny i know but i think you understand what i am trying to say
my original question
"how many of the people that had these "tweak" issues were adding weight to the car???
02-07-2006, 08:58 AM
#2885
Originally Posted by stefb
Hello
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
I'm from Belgium and sometimes buy stuff there and he has lots of T2 in stock.
He also sells by website.
02-07-2006, 09:02 AM
#2886
Tech Addict
Originally Posted by stefb
Hello
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
if nostock we can open car kit inside parts sale to you !
Thankyou !
Leo
02-07-2006, 04:21 PM
#2889
Originally Posted by raptor 700
What parts are interchangeable with the 05? I did try to search and nothing came up. Thanks
Originally Posted by xrays forum
People were asking for a list of parts which can be used on the '05 and T2:
-----------------------------------------------------
Item Description
302551 SERVO SAVER PLASTIC COVER - ECCENTRIC (2)
302580 COMPOSITE SERVO HORN - KO, JR, AIRTRONICS, MULTIPLEX
302582 COMPOSITE SERVO HORN - FUTABA, ROBE
303060 GRAPHITE MOTOR GUARD
305002 BALL DIFF. WITH LABYRINTH COVERS™ - (FACTORY KIT)
305040 SCREW FOR EXTERNAL DIFF ADJUSTMENT - SPRING STEEL
305050 DIFF PULLEY 34T WITH LABYRINTH DUST COVERS
305082 DIFF WASHER 17 X 23 X 1 (2)
305102 XRAY MULTI-DIFF
305131 INNER DRIVESHAFT ADAPTER - SPRING STEEL (2)
305150 TIMING BELT PULLEY 34T FOR FRONT ONE-WAY DIFF.
305240 DRIVE SHAFT REPLACEMENT PLASTIC CAP 3 MM (4)
305431 HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 X 507 MM
305442 HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 X 180 MM
305575 FIXED PULLEY 20T (2)
305784 SPUR GEAR 84T / 48
306131 SET OF BATTERY BACKSTOPS T1FK'05
306200 ALU SERVO MOUNT (2)
306300 ANTENNA MOUNT
306310 ANTENNA TUBE (2)
308035 COMPOSITE PISTONS - ADJUSTABLE + NON-ADJUSTABLE (SET 2+6)
308040 SHOCK ADJ. NUT ALU + O-RING (4)
308080 SHOCKABSORBER MEMBRANES (4)
308090 SHOCK FOAM INSERTS (4)
308380 ADDITIONAL XRAY ULTIMATE RACING SPRINGS (20)
308390 XRAY SELECTED ULTIMATE RACING SPRINGS (24)
309319 UNIVERSAL SET OF PLASTIC SHIMS
309500 SILICONE GREASE 00
309530 SILICONE OIL 30W
901304 HEX SCREW SB M 3 X 4 (10)
901308 HEX SCREW SB M 3 X 8 (10)
901408 HEX SCREW SB M 4 X 8 (10)
902305 HEX SCREW SH M 3 X 5 (10)
902306 HEX SCREW SH M 3 X 6 (10)
902308 HEX SCREW SH M 3 X 8 (10)
902310 HEX SCREW SH M 3 X 10 (10)
902312 HEX SCREW SH M 3 X 12 (10)
930120 CARBIDE BALL 2.4MM (12)
930138 CARBIDE BALL-BEARING AXIAL F3-8 3X8X3.5
930407 BALL-BEARING MR74ZZ 4X7X2.5 (2)
930508 BALL-BEARING MR85ZZ 5X8X2.5 (2)
941015 HIGH-SPEED BALL-BEARING 10X15X4 RUBBER SEALED (2)
960030 NUT M3 (10)
961032 WASHER S 3.2 (10)
963030 CONE WASHER ST 3X8X0.5 (10)
963041 CONE WASHER ST 4X12 (10)
965019 E-CLIP 1.9 (10)
965023 E-CLIP 2.3 (10)
965040 E-CLIP 4 (10)
965050 E-CLIP 5 (10)
966080 CH-CLIP 8 (10)
970050 O-RING 5X1 (10)
970100 O-RING 10 X 1.5 (10)
970121 O-RING 12.1X1.6 (10)
971031 SILICONE O-RING 3.1X1.6 (10)
981210 PIN 2X10 (10)
981212 PIN 2X12 (10)
And off course the pinions.
-----------------------------------------------------
-----------------------------------------------------
Item Description
302551 SERVO SAVER PLASTIC COVER - ECCENTRIC (2)
302580 COMPOSITE SERVO HORN - KO, JR, AIRTRONICS, MULTIPLEX
302582 COMPOSITE SERVO HORN - FUTABA, ROBE
303060 GRAPHITE MOTOR GUARD
305002 BALL DIFF. WITH LABYRINTH COVERS™ - (FACTORY KIT)
305040 SCREW FOR EXTERNAL DIFF ADJUSTMENT - SPRING STEEL
305050 DIFF PULLEY 34T WITH LABYRINTH DUST COVERS
305082 DIFF WASHER 17 X 23 X 1 (2)
305102 XRAY MULTI-DIFF
305131 INNER DRIVESHAFT ADAPTER - SPRING STEEL (2)
305150 TIMING BELT PULLEY 34T FOR FRONT ONE-WAY DIFF.
305240 DRIVE SHAFT REPLACEMENT PLASTIC CAP 3 MM (4)
305431 HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 X 507 MM
305442 HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 X 180 MM
305575 FIXED PULLEY 20T (2)
305784 SPUR GEAR 84T / 48
306131 SET OF BATTERY BACKSTOPS T1FK'05
306200 ALU SERVO MOUNT (2)
306300 ANTENNA MOUNT
306310 ANTENNA TUBE (2)
308035 COMPOSITE PISTONS - ADJUSTABLE + NON-ADJUSTABLE (SET 2+6)
308040 SHOCK ADJ. NUT ALU + O-RING (4)
308080 SHOCKABSORBER MEMBRANES (4)
308090 SHOCK FOAM INSERTS (4)
308380 ADDITIONAL XRAY ULTIMATE RACING SPRINGS (20)
308390 XRAY SELECTED ULTIMATE RACING SPRINGS (24)
309319 UNIVERSAL SET OF PLASTIC SHIMS
309500 SILICONE GREASE 00
309530 SILICONE OIL 30W
901304 HEX SCREW SB M 3 X 4 (10)
901308 HEX SCREW SB M 3 X 8 (10)
901408 HEX SCREW SB M 4 X 8 (10)
902305 HEX SCREW SH M 3 X 5 (10)
902306 HEX SCREW SH M 3 X 6 (10)
902308 HEX SCREW SH M 3 X 8 (10)
902310 HEX SCREW SH M 3 X 10 (10)
902312 HEX SCREW SH M 3 X 12 (10)
930120 CARBIDE BALL 2.4MM (12)
930138 CARBIDE BALL-BEARING AXIAL F3-8 3X8X3.5
930407 BALL-BEARING MR74ZZ 4X7X2.5 (2)
930508 BALL-BEARING MR85ZZ 5X8X2.5 (2)
941015 HIGH-SPEED BALL-BEARING 10X15X4 RUBBER SEALED (2)
960030 NUT M3 (10)
961032 WASHER S 3.2 (10)
963030 CONE WASHER ST 3X8X0.5 (10)
963041 CONE WASHER ST 4X12 (10)
965019 E-CLIP 1.9 (10)
965023 E-CLIP 2.3 (10)
965040 E-CLIP 4 (10)
965050 E-CLIP 5 (10)
966080 CH-CLIP 8 (10)
970050 O-RING 5X1 (10)
970100 O-RING 10 X 1.5 (10)
970121 O-RING 12.1X1.6 (10)
971031 SILICONE O-RING 3.1X1.6 (10)
981210 PIN 2X10 (10)
981212 PIN 2X12 (10)
And off course the pinions.
-----------------------------------------------------
02-07-2006, 05:10 PM
#2890
new xray t2
To answer everybodies question on the added weight. The min weigtht for touring foam is 1418 grams for rubber 1525 for rubber the added weight that you see with the factory drivers is to make the min weight. The reason why it is put were it is all Roar tracks go clockwise with means having the weight on the right side helps the when most of the turns are right handers. Which balances the car out on wear. I have a 800.000 longacre digital scale setup that I have checked this weight distribution and it works perfect.
02-07-2006, 07:25 PM
#2891
Tech Initiate
Cefx raceway in Michigan has T2 parts.
02-07-2006, 08:27 PM
#2892
Originally Posted by protc3
3/8 diameter is all you will need.the countersink is going to be 1/4" diameter when you are done.
Last edited by ROBORAT; 02-07-2006 at 10:39 PM.
02-07-2006, 09:15 PM
#2893
Tech Adept
Originally Posted by stefb
Hello
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
somebody can tell me where can i buy some parts for T2.
I asked in France but no body have parts !
Thank you very much
http://eshop.rcring.com/index.asp?pa...14097&manuf=90
