MK_Arbiter

Here is an nsx with dish rims.
http://putfile.com/pic.php?pic=main/...3362.jpg&s=f10
It wasnt really trashed on the side but on the front...
http://putfile.com/pic.php?pic=main/...1215.jpg&s=f10
I hit a cornerdot that wasnt laying flat... twice... and it ended up like this. when i didnt have it bent back into position it was folded up almost 90 degrees.

2SpeedRs40

MUch thanks.

nagatahawk

ouch!!
I was at the Tamiya tcs race Sunday and I saw the plow disc standing up on another plow disk, in the entrance to the front straight. Yuk! it was just waiting there to split cars into. someone must have put it there ther wrong way. i saw couple a very hard hits especially when it got dark.

I was in an earlier heat. gt3 and it was ok because i hit it twice and only launch the front end for a couple of feet or maybe I only hit the edge.

Next time I promise to move the disc to a safer position. I was thinking my race is over and no one was complaining so I just left it.

Oh well time for a new body, my body is thrashed also. I just ordered an audi a4 light weight,I hope it works.

MK_Arbiter

I'm just gonna get some shoe goo and drywal tape. I also have a spare mr-s shell. I have more bodies than cars...

DA_cookie_monst

iTrader: (1)

anyone got a 3Racing chassis they want shot of?

Darkseid

iTrader: (9)

I'm looking for some info...

If at all possible, anyone who is running brushless LiPo in their TA05, can you give me some info on your final weight with foam tires on.

We're trying to come up with a minimum weight for our BL/LiPo class for this winter, and I want a good idea of what the TA05 is going to shake out at.

Thanks in advance for anyone with info...

-Darkseid

cheehtae

iTrader: (15)

anybody tried the shortie arms? are they good for asphalt or carpet or both?

JimmyMac

iTrader: (2)

I just swapped out my LW arms to the shorties. So I'll find out this weekend.

bukil

iTrader: (39)

Does anyone here have a spare TRF shocks for the TA05 that wants to sell it?
PM me.

A-Ko

iTrader: (2)

http://cgi.ebay.com/Tamiya-TRF-Fluor...QQcmdZViewItem

You could get it a little cheaper from Hong Kong but I assume you want it for August. . .

Ralf

iTrader: (2)

Guys,

I am selling my strongly optioned TA05 with a lot of spare/option parts (around 40 parts references).

Title of the sell post is "TA05 Project" in the SELL Thread.

Cheers and Happy Racing !!!

bukil

iTrader: (39)

ygpm Ralf

scotwithonly1t

Can anyone clue me in on how much of the TB-02 can be used on a TA-05? Thanks in advance

rccardr

iTrader: (8)

All of the suspension pieces from the hinge pin holders al the way out to the hub carriers. Some of the turnbuckle links. Perhaps the universals, depending on what suspension you are using (either 46mm or 48mm shafts).

ittjv

iTrader: (32)

The TB-02 uses 42mm universals. They won't work on the TA05. If the TB is still sporting dogbones though, they are the same. Other than that, you'd be able to use everything rccardr mentioned since they both use the TA04 suspension; in stock form.