Tamiya TA05 Touring Sedan
#4846
Originally Posted by nexxus
Pic of my TA05
#4847
Tech Initiate
lbckevin, ok ill try to put some shims. hey btw, do u mean to say that if theres a 190mm Elec Powered rc race(lhs only), a 200mm body would be legal?
can a stock ta05 run with the big guns? xxx-s, yokomos, tc4s, evos and trfs? with the same bats and motor of course......
because most of the racers at my lhs back home run the pro kits....
will a ta05 have a chance against these kits?
thanks!
can a stock ta05 run with the big guns? xxx-s, yokomos, tc4s, evos and trfs? with the same bats and motor of course......
because most of the racers at my lhs back home run the pro kits....
will a ta05 have a chance against these kits?
thanks!
#4849
Tech Initiate
in a 190mm Elec Powered rc race(most lhs), a 200mm body would be legal? anyone?
#4851
Originally Posted by Davel
in a 190mm Elec Powered rc race(most lhs), a 200mm body would be legal? anyone?
#4852
Tech Master
iTrader: (39)
Do any of you guys have these that you are willing to sell?
TAM53570 – 4mm Aluminum wheel hub.
TAM53842 – Sway bar kit.
TAM53845 – Carbon front shock tower.
TAM53846 – Carbon rear shock tower.
TAM51066 – Suspension block 1B.
TAM51067 – Suspension block 1C.
Let me know via pm. I already posted this to the WTB forum. I just thought I would post this here also to get faster response.
Thanks,
Mark
TAM53570 – 4mm Aluminum wheel hub.
TAM53842 – Sway bar kit.
TAM53845 – Carbon front shock tower.
TAM53846 – Carbon rear shock tower.
TAM51066 – Suspension block 1B.
TAM51067 – Suspension block 1C.
Let me know via pm. I already posted this to the WTB forum. I just thought I would post this here also to get faster response.
Thanks,
Mark
#4853
Hey tappers, would this cover me for tapping my chassis before I install aluminum screws?
http://www.harborfreight.com/cpi/cta...emnumber=39384
If I've got it right, I think the 3-0.5 is the right one (smallest one in the set).
http://www.harborfreight.com/cpi/cta...emnumber=39384
If I've got it right, I think the 3-0.5 is the right one (smallest one in the set).
#4854
Tech Initiate
anybody tried the RZ stock from tamiya with their ta05? what pinion should be used with a 70T and what is the final ratio to get the most of the car and the motor? thanks!
#4855
Originally Posted by gibbous
Hey tappers, would this cover me for tapping my chassis before I install aluminum screws?
http://www.harborfreight.com/cpi/cta...emnumber=39384
If I've got it right, I think the 3-0.5 is the right one (smallest one in the set).
http://www.harborfreight.com/cpi/cta...emnumber=39384
If I've got it right, I think the 3-0.5 is the right one (smallest one in the set).
#4856
Tech Initiate
anybody tried the RZ stock from tamiya with their ta05? what pinion should be used with a 70T and what is the final ratio to get the most of the car and the motor? thanks!
#4857
Originally Posted by Davel
anybody?
#4858
here's a pic of my TA05 with 3racing chassis, haven't run it though... at the moment it's still running on tamiya parts so it's legal for tamiya races.
#4859
Tech Initiate
3racing parts leagal for tamiya races?
#4860
Originally Posted by Davel
3racing parts leagal for tamiya races?