Ask Steve "The Evicerator" Weiss
#6841
The Evicerator
Hey Tony,
I haven't heard from her.
Lately I have been running either a Mazdaspeed 6 or a LTC-R... both seemed to work pretty well up at Speedworld this past weekend... but I have a feeling most people will be running MazdaSpeeds!
I haven't heard from her.
Lately I have been running either a Mazdaspeed 6 or a LTC-R... both seemed to work pretty well up at Speedworld this past weekend... but I have a feeling most people will be running MazdaSpeeds!
Steve, did Toni im/e-mail/or call you yet? If so then she know's what type body style works there. We run Mazda 6 in Fl./rubber tires on asphalt. Lynn has to paint her up something to run as she wants to race the Reedy this year. Please let me know so I can get her taken care of. Thanks Tony.
#6842
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
Hey Steve can i get an fdr for a 13.5 running at bending corners? Thanks
#6844
The Evicerator
We have talked about offering sensor wire extentions, but I'm really not sure where that project sits at the moment! Once the big bosses are back and settled from their trip I'll see what I can find out!
#6847
The Evicerator
No problem!!
#6848
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
im running a gtb on profile 3
#6849
The Evicerator
#6850
How about after a 6 minute run (now that ROAR is all 6 minutes...)?
#6851
The Evicerator
Same temperature. If you were running for 10 minutes with the 5 minute gearing/160 degree gearing you'd probably wind up running hotter than 160
#6852
Tech Fanatic
iTrader: (13)
Hi Steve...
I have an incoming 10.5 EX motor and a used Velocity motor.
Can I transfer the inner components of the 10.5 EX motor into
the Velocity motor can? I just want to use its ribbed can and
oversized front bearing and possibly the sintered rotor of
the velocity motor.
Thanks
I have an incoming 10.5 EX motor and a used Velocity motor.
Can I transfer the inner components of the 10.5 EX motor into
the Velocity motor can? I just want to use its ribbed can and
oversized front bearing and possibly the sintered rotor of
the velocity motor.
Thanks
#6854
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
thks steve