Team Associated TC4
#9871
Tech Master
iTrader: (16)
i have had a few Castle systems though the years an i have never had any issues with them, although im never looking to break any records either. I run them under their limits generally speaking or play with the gearing to pull them back a bit. Comes with the joys of just bashing around, i dont need to be the fastest car out there.
That said, looking at LRP which one am i after. I have completely lost touch with what Associated is doing now electronics wise.
That said, looking at LRP which one am i after. I have completely lost touch with what Associated is doing now electronics wise.
#9872
gears
Anyone know a good gearing to go with a mamba max pro 7700 and 2s 25c lipos
part number for spur and pinion would be super helpfull
part number for spur and pinion would be super helpfull
#9873
For a MM7700 I would start gearing at 8.18fdr(22t pinion/72t spur) to 8.57fdr(21t pinion/72t spur) with rubber tires on a big track. That is a front spool: diffs won't hold up! As for part numbers, go to towerhobbies.com and checkout their pinion and spurs category....
#9874
For a MM7700 I would start gearing at 8.18fdr(22t pinion/72t spur) to 8.57fdr(21t pinion/72t spur) with rubber tires on a big track. That is a front spool: diffs won't hold up! As for part numbers, go to towerhobbies.com and checkout their pinion and spurs category....
will that be ok ? i know ill have to just see how the temps are but in theroy that gearing should work right ?
#9875
Does anyone know a digital servo that will fit good in the TC4 with no modification ??
#9876
A 9.0fdr is a good start, but watch motor and esc temps carefully ! As for servos you can use just about any digital servo: jr z9100s $139.99 is probably the best out there, but you will need to check the manual for the right servo spacer....Remember the losi lcd drives(losa3344) for the front end.....
#9877
ok cool thanks allot
#9879
i cant post a picture of my tc4 untill i reach a certin number of posts , how many is that ?? im not gonna wait and find out how dumb !! off to find a better forum where i can actualy show people my beloved Tc4 peace out guys
#9880
It's fairly standard, actually. I think it's something like 10. Most legit forums don't allow pic posting until the user shows they're a legit user (as opposed to a spam-bot that got around the other verifications) . . .
#9881
Tech Regular
#9882
well if its only 10 or so thats not bad i could handle that
#9883
boosted/ non-boosted set-up
I'm looking for a boosted/ non-boosted set-up, can someone help me out?
#9884
Tech Master
iTrader: (13)
This part has not changed much since the TC4 Factory Team. That edition the shock bushing was shortened so the shock angle was reduced. Since then the TC5 and TC6 versions are basically the same geometrically except they take a M3 screw instead of a 4-40. That being said yes, they are interchangeable provided you have the M3 screws and enlarge the shock mounting hole in the tower to accept it.
#9885
What are some changes I can make to increase traction in the front end. I am having trouble keeping speed up while making turns. I have t scrub too much speed in order to make the same turns that others are making. I am running 4 degree blocks up front and 1.5 degrees of camber. I have the camber links on the closest hole to get some camber gain in the corner. Is this too much?