HPI #6507 Universal Body Post Set 4-40/3mm also work well

I use the associated bulkhead shims under the body post to raise it up a bit.

Perfect. Thanks Guys. I ordered set of the HPI posts. They looked the longest and I can always cut them down. The AE posts looked to only be 1 hole longer than the stock posts and I wasn't sure that was enough.

Can someone give me a hand? I open this link but it's just a blank setup sheet for me. There's only a cpl on the associated site that I can see...the rest are blank.

Thanks

Try using ie or firefox to view, these sheets don't pull up on ipod/ipad/iphones.

TC6.1 Parts
 

Can anyone help me pls. I want to know the comprehensive list of upgraded parts the tc6.1 has over the tc6 - The petitrc list and the Team Ass. sites don't list the gear diff and outdrives etc. Also did the 3 hole vertical rear diff top brace come out with the tc6.1 or is it a factory aftermarket item?

Here is parts list for upgrade to TC6.1 as posted by Associated:

http://www.teamassociated.com/news/a..._TC6.1_FT_Kit/

88mm chassis
 

Noticed the stock chassis was narrowed to 88mm. 4mm on each side shaved off? To reduce chassis rub? By Narrowing it does the chassis become more flexible? Thanks

Yeah would have more flex. Super narrow chassis seems to be fashionable these days.

narrow chassis is not easy to touch the ground when cornering :smile:

tc6 vs tc6.1
 

Thanks but as I already mentioned in my above post - the Associated site doesn't list all the upgraded parts such as the gear diff

The tc6.1 kit comes with these parts in the box - tc6.1 owners please add other parts it comes with

784695 313569 #31356 TC6.1 Front Arms $7.99 January 2012
784695 313576 #31357 TC6.1 Rear Arms $7.99 January 2012
784695 313583 #31358 TC6.1 Caster Blocks $7.99 January 2012
784695 313590 #31359 TC6.1 Rear Hub Carriers $6.99 January 2012
784695 313606 #31360 TC6.1 Steering Block, 1pr. $5.99 January 2012
784695 313613 #31361 TC6.1 Offset Arm Mounts $8.99 January 2012
784695 313620 #31362 TC6.1 Anti-roll Bar Set $27.99 January 2012
784695 313637 #31363 TC6.1 Anti-roll Bar Tube $8.99 January 2012
784695 313644 #31364 TC6.1 Anti-roll Bar Wire, qty 4 $9.99 January 2012
784695 313651 #31365 TC6.1 Anti-roll Bar Mount, qty 4 $3.99 January 2012
784695 313668 #31366 TC6.1 CVA Kit $29.99 January 2012
784695 313675 #31367 TC6.1 CVA Rebuild Kit $6.99 January 2012
784695 313682 #31368 TC6.1 CVA Bone, qty 2 $14.99 January 2012
784695 313699 #31369 TC6.1 CVA Axle, qty 2 $9.99 January 2012
784695 313705 #31370 TC6.1 Axle Crush Tube, qty 4 $3.99 January 2012

Rear Gear Diff
Rear outdrives to suit rear diff
Front solid spool
Front outdrives to suit front spool

The TC6 does come with a gear diff and solid front axle. The 3hole bearing caps are a new FT part and are not a running change to the kit. As far as chassis go, the 6.1 still uses the original chassis.

My understanding is that this was done to prevent the chassis from dragging, not to increase flex (although it will slightly).

Rick, correct. Between riding curbs and a fast sweeper my car was dragging a lot, and sometimes would catch and spin out, the narrower chassis reduced that. It does flex a bit more so i went back to a regular upper deck (instead of one cutout (front and back) as we usually run. I must thank Dawson and FJ for their help (its always nice to hear what my car does wrong) after a few weeks of heavy testing i was very happy with the car:sneaky:

What were you cutting on the upper deck?