|
that's exactly what i was looking for. thank you
|
1 Attachment(s)
Took my evo iv apart for the first time tonight to give it a full clean etc, now when putting the spur gear and those bits together ive got a little confused, ive taken a picture, here it would make sense to me to have two bearings riding in the bulkheads like it does at the front, the manual shows 1 and i only have 1 bearing. Should it go on the inside or the outside of the bulkhead, see image attached.
|
id say where u have it is the correct way, look for signs of wear on the bulheads top and bottom.
|
that should be correct... the other end of the shaft is supported by the spur mount, thats why it only has one in the back...
|
Originally posted by berger Took my evo iv apart for the first time tonight to give it a full clean etc, now when putting the spur gear and those bits together ive got a little confused, ive taken a picture, here it would make sense to me to have two bearings riding in the bulkheads like it does at the front, the manual shows 1 and i only have 1 bearing. Should it go on the inside or the outside of the bulkhead, see image attached. |
Can you add another 950 bearing in the front as well? like would it make any improvements? as the front diff input shaft has 2 bearings supported
|
it won't stay there as there is nothing to stop it vibrating forwards.
it doesn't really need it anyway |
Originally posted by hawker it won't stay there as there is nothing to stop it vibrating forwards. it doesn't really need it anyway |
How much did they change on the EVO IV MS kit vs the stock EVO IV?
|
Originally posted by JDM_DOHC_SiR They are selling the one piece bulkheads for about 45$ each and the center alloy brace is 20$ ..... so about 110$ for a MS upgrade.... any tamiya dealer should be able to order these spare parts:nod: -Dave:sneaky: Edit: Speedtechs site has it listed. Hop-ups: Graphite bumper brace Blue aluminum FL coated shocks Blue aluminum shock collars Blue aluminum rear hub carrier Blue aluminum ball studs throughout Blue aluminum pillow balls Front and rear aluminum center drive cups Light weight aluminum center shaft Blue light weight aluminum turnbuckles through out Low Friction ball cups possibly the light weight front and rear input shaft are included as well New hop-up: "Y" center post. This piece mounts to one point on the lower deck, but mounts to two points on the upper deck. Much more specs to be announced soon. |
Solid axel for TB evo4
hello,
I'd like to buy the solid for my car but I cann't get some a source... Can you help me, pls? thnx |
solid axle
|
Re: solid axle
Originally posted by tamiyarcracer Try www.speedtechrc.com Here is the link http://www.speedtechrc.com/store/ebp...id=322&id=1554 |
Tamiya performance part: rear suspension
1 Attachment(s)
For those interested Tamiya America has a new released a hop-up part.
RC Pro Module Rear Suspension set: part #1004 MSRP: $89.99 TCS legal! :D |
Interesting that it's marketed as a Tamiya America part, not just Tamiya.... I wonder what chassis' this upgrade will be legal for...
BTW, I have a NIB unassembled Evo 4 I am selling. Includes 2 sets of mounted A's and the clear gearbox covers. PM if interested. |
| All times are GMT -7. It is currently 06:00 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.