XERUN V2.0 Brushless ESC discussion thread.
#1081
Tech Adept
I jave just receive my second xerun this time 60a version and on this is 14awg
Wire and smal capacitor board. Can i benefit from 12awg wire and capacitor Like on 120a version or 60a version don't need this upgrade.
Is this capacitor ok to use? I have speedpassion super capacitor board probably better then this one.
I use 10.5t motor pushed to the limit so it's Like running 5.5 or 6.5 without turbo timing.
Can i use same setup as on 120a for 10.5t motor?
Thanks
Wire and smal capacitor board. Can i benefit from 12awg wire and capacitor Like on 120a version or 60a version don't need this upgrade.
Is this capacitor ok to use? I have speedpassion super capacitor board probably better then this one.
I use 10.5t motor pushed to the limit so it's Like running 5.5 or 6.5 without turbo timing.
Can i use same setup as on 120a for 10.5t motor?
Thanks
#1082
I jave just receive my second xerun this time 60a version and on this is 14awg
Wire and smal capacitor board. Can i benefit from 12awg wire and capacitor Like on 120a version or 60a version don't need this upgrade.
Is this capacitor ok to use? I have speedpassion super capacitor board probably better then this one.
I use 10.5t motor pushed to the limit so it's Like running 5.5 or 6.5 without turbo timing.
Can i use same setup as on 120a for 10.5t motor?
Thanks
Wire and smal capacitor board. Can i benefit from 12awg wire and capacitor Like on 120a version or 60a version don't need this upgrade.
Is this capacitor ok to use? I have speedpassion super capacitor board probably better then this one.
I use 10.5t motor pushed to the limit so it's Like running 5.5 or 6.5 without turbo timing.
Can i use same setup as on 120a for 10.5t motor?
Thanks
Now the 4 part Capacitor........ personally I like the bigger capacitor, seems to reduce heat in both the ESC and the Motor, also is considerably easier to mount than the side by side layout on the 2 part capacitor board, i personally tape it down the centreline of the chassis next to the belt as this is neatly hidden and nicely protected from knocks etc, again you may notice a difference but then again you may not.
Pays your money etc......
#1083
Tech Apprentice
It's safe to use turbo function on a 60A ESC?.
What's the motor limit for the turbo?
What's the motor limit for the turbo?
#1084
Tech Adept
#1085
Tech Regular
iTrader: (4)
hey can someone please tell me if this is the same as the hobbywing esc. if so what program card do I need?http://www.hobbyking.com/hobbycity/s....2)&aff=12350t
#1086
hey can someone please tell me if this is the same as the hobbywing esc. if so what program card do I need?http://www.hobbyking.com/hobbycity/s....2)&aff=12350t
#1087
Tech Regular
Hi, Xerun drivers.
The forum is not buzzi at the moment, it's pitty because I see the Xerun 120
become faster and faster, and this we al looking for.
And realibillity is quit good.
Show some settings for 13.5 and 4.5t for TC if you like.
Let not all the work to be done by cherryblost he is a great guy and
share all he knows.
Ed
The forum is not buzzi at the moment, it's pitty because I see the Xerun 120
become faster and faster, and this we al looking for.
And realibillity is quit good.
Show some settings for 13.5 and 4.5t for TC if you like.
Let not all the work to be done by cherryblost he is a great guy and
share all he knows.
Ed
#1088
Anybody run these in a 10th scale buggy ? maybe 13.5t class ?
#1089
Tech Regular
#1090
#1091
Tech Regular
#1092
Yes it is Best investment in brushless I have made. Simply put love it.
Now for another question.
Just got a Ofna Hyper 10sc , Is it possible to use this esc for a 550 size 5.5t motor ?
This is the motor Im gonna use by the way.
http://www.teamepiconline.com/shop/i...p?item=TEP1034
Now for another question.
Just got a Ofna Hyper 10sc , Is it possible to use this esc for a 550 size 5.5t motor ?
This is the motor Im gonna use by the way.
http://www.teamepiconline.com/shop/i...p?item=TEP1034
#1093
Yes it is Best investment in brushless I have made. Simply put love it.
Now for another question.
Just got a Ofna Hyper 10sc , Is it possible to use this esc for a 550 size 5.5t motor ?
This is the motor Im gonna use by the way.
http://www.teamepiconline.com/shop/i...p?item=TEP1034
Now for another question.
Just got a Ofna Hyper 10sc , Is it possible to use this esc for a 550 size 5.5t motor ?
This is the motor Im gonna use by the way.
http://www.teamepiconline.com/shop/i...p?item=TEP1034
#1094
Tech Rookie
XeRun 60A
Hi all,
I have a XeRun 60A V2.1 in my Yokomo Bmax4 together with a Ballistic 7.5 with a roll out of 9.0.
Speedo and lipo are around 40°C and motor at 62°C after a 8 - 10 min run on an Astroturf track.
Software is V1.10_091218a_t which I think is an old version (version 27). Punch is at 5 and timing at max.
I would like to have some more top end on the straight, smoother acceleration (more lineair) out of the corner, better brakes and cooler temperatures of the motor.
Which software version is advised?
Probably a lot to ask for but it is not really clear which are the best softwares per application.
Thanks in advance.
I have a XeRun 60A V2.1 in my Yokomo Bmax4 together with a Ballistic 7.5 with a roll out of 9.0.
Speedo and lipo are around 40°C and motor at 62°C after a 8 - 10 min run on an Astroturf track.
Software is V1.10_091218a_t which I think is an old version (version 27). Punch is at 5 and timing at max.
I would like to have some more top end on the straight, smoother acceleration (more lineair) out of the corner, better brakes and cooler temperatures of the motor.
Which software version is advised?
Probably a lot to ask for but it is not really clear which are the best softwares per application.
Thanks in advance.
#1095
Tech Regular
Yes it is Best investment in brushless I have made. Simply put love it.
Now for another question.
Just got a Ofna Hyper 10sc , Is it possible to use this esc for a 550 size 5.5t motor ?
This is the motor Im gonna use by the way.
http://www.teamepiconline.com/shop/i...p?item=TEP1034
Now for another question.
Just got a Ofna Hyper 10sc , Is it possible to use this esc for a 550 size 5.5t motor ?
This is the motor Im gonna use by the way.
http://www.teamepiconline.com/shop/i...p?item=TEP1034
If this is close then it is OK if not you have to purschase the Xerun120A.
Good luck
Ed