TA-05 ver.2
#2671
Tech Addict
iTrader: (15)
Okay need some advise and suggestions
On my TA05V2 Im running yellow front springs with the red sway bar
The rear springs are yellow also and using the yellow sway bar in the back
The tires were Solaris Slicks on a rubber surface. But the surface
doesn't seem to matter. I gotta find some more grip up front
Its pushing madly!!!
Any suggestions on what to change suspension wise to get more grip?
Mike
On my TA05V2 Im running yellow front springs with the red sway bar
The rear springs are yellow also and using the yellow sway bar in the back
The tires were Solaris Slicks on a rubber surface. But the surface
doesn't seem to matter. I gotta find some more grip up front
Its pushing madly!!!
Any suggestions on what to change suspension wise to get more grip?
Mike
#2672
Tech Lord
iTrader: (86)
TA05v2 has some inherent understeer for some reason. I suggest use shorter front upper link positions to see what it does and also look into BB from blocks or even AA front blocks. Also make sure you don't have excessive rear toe in and rear diff is tight enough. Also more rear droop might be helpful.
What bodies is he using ,may have too big of the rear wing!
#2673
Tech Elite
iTrader: (1)
Hi Guys, thanks for being so fast!!!
Sorry for replying so slow, Im on my Evening tour and it was busy last night!
Anyway I don't think the wing had anything to do with it, but I gotta replace it anyway. We were running at a brand new facility and I got too close to a marshall and when he jumped over my car to avoid the collision, he clipped my wing and broke it anyway!
Im going to try all of the suggestions that you posted one at a time and will see what does and doesn't make a difference. Im gonna try the wing first, since I gotta do that anyway!!!
OVA would the actual height come into play or just the physical size??? (Just thought of this!!!)
Sorry for replying so slow, Im on my Evening tour and it was busy last night!
Anyway I don't think the wing had anything to do with it, but I gotta replace it anyway. We were running at a brand new facility and I got too close to a marshall and when he jumped over my car to avoid the collision, he clipped my wing and broke it anyway!
Im going to try all of the suggestions that you posted one at a time and will see what does and doesn't make a difference. Im gonna try the wing first, since I gotta do that anyway!!!
OVA would the actual height come into play or just the physical size??? (Just thought of this!!!)
#2674
Tech Lord
iTrader: (86)
Hi Guys, thanks for being so fast!!!
Sorry for replying so slow, Im on my Evening tour and it was busy last night!
Anyway I don't think the wing had anything to do with it, but I gotta replace it anyway. We were running at a brand new facility and I got too close to a marshall and when he jumped over my car to avoid the collision, he clipped my wing and broke it anyway!
Im going to try all of the suggestions that you posted one at a time and will see what does and doesn't make a difference. Im gonna try the wing first, since I gotta do that anyway!!!
OVA would the actual height come into play or just the physical size??? (Just thought of this!!!)
Sorry for replying so slow, Im on my Evening tour and it was busy last night!
Anyway I don't think the wing had anything to do with it, but I gotta replace it anyway. We were running at a brand new facility and I got too close to a marshall and when he jumped over my car to avoid the collision, he clipped my wing and broke it anyway!
Im going to try all of the suggestions that you posted one at a time and will see what does and doesn't make a difference. Im gonna try the wing first, since I gotta do that anyway!!!
OVA would the actual height come into play or just the physical size??? (Just thought of this!!!)
question : Are you running the spool or Gear diff? gear diff will give you more steering for sure
I can shares you my set up..lmk
If your track is small and low grip..I would converter to lay down shock( IFS )
works for me, cause ifs set up is softer and it make the car turn in easy..
Last edited by OVA; 10-20-2016 at 01:04 PM.
#2677
Quick question, i messed up my front end during a crash and I need to replace the arms. Currently I have the short reversible arms. Will the 418/419 arms work?
#2679
Did anyone look into getting a floating servo holder in TA05?
Since I'm still awaiting mine to arrive, I'm getting extremely curious!
I'm not sure if there is a extra hole free next to the hole where stock servo holder sits?
If I ever get, which I'm sure I will raceberry chassis for it, it will be modified to fit EXO 5 servo stay
Cheers
Since I'm still awaiting mine to arrive, I'm getting extremely curious!
I'm not sure if there is a extra hole free next to the hole where stock servo holder sits?
If I ever get, which I'm sure I will raceberry chassis for it, it will be modified to fit EXO 5 servo stay
Cheers
#2680
#2682
Bummer, I'd have to get some carbon re-enforced parts as I plan to run the shocks in ISF.
#2684
#2685
Tech Initiate
Hey guys ive really been interested in upgrading the chassis im using that came with my ta05 v2r kit. I was noticing there really arent any options online anymore, the 3racing stuff is pretty much all out of stock and the only usable one i found was like $100 and i believe id have to convert my setup to a mostly vdf based design to even use that kit.
Ive been interested in cutting out my own chassis for a custom build setup and it seems relatively easy to pull off. Since i dont see anyone selling or remaking the exotek ex05 for my kit i was thinking i could instead cut a plate of carbon fiber to match that if anyone had a way for me to get a hold of a print out to use for reference points in cutting the CF. I was originally gonna use my stock chassis but id be in heaven if i could setup something more like the ex05.
Does anyone know of a way i could get a hold of something to use as the exotek ex05 reference for me to use to cut out of carbon fiber?
Ive been interested in cutting out my own chassis for a custom build setup and it seems relatively easy to pull off. Since i dont see anyone selling or remaking the exotek ex05 for my kit i was thinking i could instead cut a plate of carbon fiber to match that if anyone had a way for me to get a hold of a print out to use for reference points in cutting the CF. I was originally gonna use my stock chassis but id be in heaven if i could setup something more like the ex05.
Does anyone know of a way i could get a hold of something to use as the exotek ex05 reference for me to use to cut out of carbon fiber?