57LikesThe Speed Passion Thread
05-28-2012 | 05:53 AM
#9481
I know kinda dumb question, but does the fan for the gt 2.0 esc orient so the air is pushed down toward the heat sink or up to pull hot air away from the esc? I was thinking the air should blow down on the esc, but then the fan is exposed for potential damage (dirt, small rocks, etc)
I have a cirtix stock club race that is acting up. It has been sitting in my TC without a motor hooked to it for a few months. I soldered on a motor and tried to calibrate it and it is not working. I can go through the calibration but when trying to run the motor if I do not spin the motor first by hand nothing happens. I have tried two different motors that both work with my other Cirtix stock club race ESC??
05-30-2012 | 09:51 PM
#9482
05-31-2012 | 12:07 PM
#9483
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
Please give our office a call...if the ESC is under warranty we will replace the ESC for you. It sounds like sensor problem on the sensor socket on the ESC if you have tried 2 different motor and 2 different sensor cables and no deal.
05-31-2012 | 01:40 PM
#9484
NEW Sensor Boards available
The new sensor boards are on the site and in stock!!! 
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
05-31-2012 | 04:57 PM
#9485
05-31-2012 | 07:13 PM
#9486
Joined: Jan 2004
Posts: 5,058
From: Rockville, MD
The new sensor boards are on the site and in stock!!!
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
+30* yellow and +40* blue
http://www.speedpassion.net/us/produ...SP000059&c=OPT
06-01-2012 | 03:06 PM
#9487
I know kinda dumb question, but does the fan for the gt 2.0 esc orient so the air is pushed down toward the heat sink or up to pull hot air away from the esc? I was thinking the air should blow down on the esc, but then the fan is exposed for potential damage (dirt, small rocks, etc)
Last edited by silverhkswrx; 06-01-2012 at 03:18 PM.
06-05-2012 | 10:26 AM
#9489
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
06-05-2012 | 11:44 AM
#9490
Joined: Jan 2004
Posts: 5,058
From: Rockville, MD
I just placed my order this morning. I hope Albert gets them out to me. I'm ready to try them. I tried to buy them the other month and KingGolden sent me an email saying they couldn't sell them in the states.
06-05-2012 | 01:37 PM
#9492
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
The last month version are all BLACK in color, they are the pre-production unit that can only be used around the world EXCEPT USA. I need them to be color coded so the tech can spot the sensor from the outside of the can what sensor that they are using. We don't do hand out motor racing much in USA but this actually helped to spot if anyone alter the sensor if they are suppose to use the stock black unit. This is very important for other country that do hand out racing beside USA.
06-06-2012 | 07:06 AM
#9494
Hey guys im thinking of getting a speed passion esc 2.0 ....can i just flash that speedo to get the 2.1 software and is that the latest software .....sorry for all the newbie questions but its my first time with speed passion.
06-06-2012 | 08:05 AM
#9495
ALL of the GT series speed controls use the same software whether it's a 2.0 or a 2.1, so you will have no problems.