![]() |
have been testing my new MMM today for the first time it certainly is a differant motor to the V3 its friggen awsome my Fdr changed quiet a bit from a 4 to a 7 with temps around 70 degrees
great motor A+++ for thr MMM 17.5 :D |
Originally Posted by mattwoodcraft
(Post 9966651)
have been testing my new MMM today for the first time it certainly is a differant motor to the V3 its friggen awsome my Fdr changed quiet a bit from a 4 to a 7 with temps around 70 degrees
great motor A+++ for thr MMM 17.5 :D I will keep moving toward the 7. Thanks. |
Originally Posted by burgboyz
(Post 9967592)
Wow! That big of a difference? No wonder I felt slow at 5.2 up from a 3.8!!!
I will keep moving toward the 7. Thanks.
Originally Posted by mattwoodcraft
(Post 9966651)
have been testing my new MMM today for the first time it certainly is a differant motor to the V3 its friggen awsome my Fdr changed quiet a bit from a 4 to a 7 with temps around 70 degrees
great motor A+++ for thr MMM 17.5 :D But if I do have new setup...I will post on the site, keep checking the setup page here.. http://www.speedpassion.net/us/escsetup.asp?page=1&t=4 |
Hi, does anyone have an approx FDR for the following combo?
Running a GT 2.0 lpf ESC and 21.5T Competition 3.0 motor. Its on a med/large technical track with medium traction (asphalt). Rubber tires. Supercharger function is permitted. Cheers :tire: |
Originally Posted by mattwoodcraft
(Post 9966651)
have been testing my new MMM today for the first time it certainly is a differant motor to the V3 its friggen awsome my Fdr changed quiet a bit from a 4 to a 7 with temps around 70 degrees
great motor A+++ for thr MMM 17.5 :D Is this in a TC? Carpet or asphalt? Boosted or blinky? Solara, Here at Fastlane in MO, there are still a few guys running boosted and I could understand that difference going from blinky to boost. I will be testing more tomorrow night in blinky mode to try to find the right fdr. Thanks for being close by. Another reason I choose to run SP!!:nod: |
this is on a TC boosted asphalt track it is a large track 65m front straight and 40 rear
i have the standard timing on the MMM with a 40 boost and a 24 turbo running a 7.1-7.4 FDR dropping adding a tooth on the pinion have a data logger coming so we can start setting the correct boost start RPM i have it on 3000 at the moment but i think this might be a bit low 4000 might be better it took me 8 battarys with the last 2 batterines running the full 6m30 |
Originally Posted by Solara
(Post 9968369)
If I remember correctly, you guys are running boosted 17.5 right..? If so...7 or even 8 is about right (depends on the size of the track). Here in US we are dropping the boosted class and most of us are running no timing now...so there might not be too much setup sheet to share about boosted 17.5 or any boosted class....
But if I do have new setup...I will post on the site, keep checking the setup page here.. http://www.speedpassion.net/us/escsetup.asp?page=1&t=4 is there going to be a APP update so the 323 stock software will be on the I phone ? the apps a great idea |
Originally Posted by mattwoodcraft
(Post 9971972)
once i have finished testing i will send a set up sheet for boosted 17.5 MMM.
is there going to be a APP update so the 323 stock software will be on the I phone ? the apps a great idea |
Im looking at buying a GT2.0 pro esc. They seem to be hard to find in stock anywhere...
Are SP coming out with a replacement soon? If so should I wait? |
Originally Posted by azz187
(Post 9972883)
Im looking at buying a GT2.0 pro esc. They seem to be hard to find in stock anywhere...
Are SP coming out with a replacement soon? If so should I wait? |
Originally Posted by azz187
(Post 9972883)
Im looking at buying a GT2.0 pro esc. They seem to be hard to find in stock anywhere...
Are SP coming out with a replacement soon? If so should I wait? |
Cool thanks guys.
|
i have a older cirtix esc that i was going to use in a 17.5 no timing class. I sow that there is a new one out. I sow that the esc wire and switch wires are not plug in instead of solding them to the board.
is that the only difference? thanks. |
Originally Posted by Solara
(Post 9972583)
The new APP (android/apple app) is designed for the new REVENTON series ESC. However, we might do a conversion and might cover the current GT models.
it would be good to have the GT stsuff on there to :D |
Originally Posted by M-Technic
(Post 9973705)
I think they are coming out with a replacement early next year, but the GT 2.0 Pro is an awesome ESC and it's cheap...
Originally Posted by sideways88
(Post 9976248)
i have a older cirtix esc that i was going to use in a 17.5 no timing class. I sow that there is a new one out. I sow that the esc wire and switch wires are not plug in instead of solding them to the board.
is that the only difference? thanks. |
| All times are GMT -7. It is currently 06:51 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.