Thanks.

Anyone have a good setup for the mmm 17.5 ?? ( non timing - "blinky" on a somewhat large carpet track , flowing and fast but still technical layout )
Timing and FDR settings ! I ran it once at 4.0 FDR and full ( 20 degree ) timing. It was very fast early but faded too much. Unfortunately I don't get enough test and tune time between races...

i have not rum much with with out using timing but i would suggest starting at a FDR of 5.5 and see what happens just keep dropping a few teeth at a time and check the temps.
with my old V3 i was running a FDR of 4 and now have a FDR of 7.3

Hi there,

I was wondering if I can obtain a GT 2.0 housing replacement any where or from SP themselves? Mine's held together with tape ATM coz I was too harsh on the clips.

Thanks

I have been experimenting with different firmware On the GT 2.0, and loaded some of the latest hobbywing settings on to try, problem is now I can't seem to load SP firmware back on, keeps coming back with message saying unable to upgrade. Any suggestions?

I have been running the citrix short course esc and v2 17.5 in my blitz and took it out tonight for an oval race. I was running max timing on the esc and added some more timing via the motor (estimated 10-15Degrees). Now I knew I was pushing the limits and it failed on me as i was leading the amain lol...greed sux.

I was considering going with the same setup since they are on sale, but then I was looking at the 17.5 mmm. How good is this motor? can it be paired with the short course esc?

Im trying to find a good 17.5 setup without breaking the bank. Anyinput would be great

Go to the 205_mod and then upgrade it on the sp software.

Solara. i have a question regarding the much more racing thermoelectric motor cooler. here the temps are getting hot weather can these be used on brushless motors at all to cool them rite down before your race ?

or does anyone use these at all on the brushless motors

you want to coolem before a race ? try spray freeze , lol. then come in at 4 mins and spray again. i am joking.

thanks mate, so they can be used on brushless

Ive seen guys use them... They seemed to work very well to cool the motor. I cant remember exactly, but I think it dropped the temp around 10deg or so.

Its getting hot here also... Track temps should be hitting 60c soon enough :(

great thanks i used a long time ago with brushed but i thought i would ask befor buying another fan. thanks 10 degrees is always a good thing when its hot for sure

I just purchased a used gt 2.1 prostock. I believe it was used for non boosted 17.5 off road. Do I need a laptop to tell what software it has and change it for boosted touring? I have the pro lcd box and software..

to dee what software it has connect the box it will tell you what firmware the speedy has.
if you want to change the firmware you will need to use a lap top and down load the pc interface.

all the info is on the speed passion web site with vidio support aswell

Try 4.75 final with 30* green board (all the way to 30*).