R/C Tech Forums - The Speed Passion Thread

S and R are schedule to be in USA for the 1st week of APRIL.....

I really hate this job because this is what I was told from the MFR....but again, that is what I was told, if they decide to take another Chinese New Year Vacation for no reason at all....then I cannot control it.

But I am very confident most of the shop will have the S and R by the 1st/2nd week of APRIL....along with the wifi/bluetooth module that will work well on the ESC.

Reventon STOCK CLUB RACE will be follow...like 3rd week of April after Easter.

Thanks for the update.

jordan.norwood@

03-14-2012 10:49 AM

How about the releases in the UK?

Solara

03-14-2012 12:39 PM

Quote:

Originally Posted by jordan.norwood@ (Post 10466263)

How about the releases in the UK?

Should be the same time....contact Mark from Schumacher.

Warren Weaver

03-14-2012 05:06 PM

does the speed passion gt 2.0 have blinky firmware out of the box

Madulla

03-14-2012 06:17 PM

I am running 13.5 boosted. Do I need the R or S? Reading the specs does the supercharger software work on the S? I am not going to run mod or anything faster than a 13.5 but need the turbo and boost. Thanks

Oggie

03-15-2012 04:13 AM

Quote:

Originally Posted by Warren Weaver (Post 10467617)

does the speed passion gt 2.0 have blinky firmware out of the box

Unless they have changed things recently, no, it does not have blinky firmware installed out of the box. You will need a 2-in-1 box to program it with the blinky firmware.

Nexus

03-15-2012 08:16 AM

Quote:

Originally Posted by Warren Weaver (Post 10467617)

does the speed passion gt 2.0 have blinky firmware out of the box

Quote:

Originally Posted by Oggie (Post 10469616)

Unless they have changed things recently, no, it does not have blinky firmware installed out of the box. You will need a 2-in-1 box to program it with the blinky firmware.

Yep...I just setup 2 GT Pro 2.0s and had to load the "blinky" 508 software myself.

Solara

03-15-2012 09:21 AM

Quote:

Originally Posted by Warren Weaver (Post 10467617)

does the speed passion gt 2.0 have blinky firmware out of the box

No...it has 205G for modified motor.

Solara

03-15-2012 09:24 AM

Quote:

Originally Posted by Madulla (Post 10467999)

"R" version should be the one for you to use. We are still working on the boost software named "STOCK1". The software is not ready for now but it will be ready sometime this summer. For the "S" version, we will have a mild boost version for this ESC because it is a lower AMP version of ESC, the full boost version will damage that ESC.

If you need the boost software ESC for now...I would suggest the current GT version of ESC.

AOD	03-15-2012 09:52 AM

Will my current LCD box work with the new speed controllers?

Solara

03-15-2012 10:06 AM

Quote:

Originally Posted by AOD (Post 10470813)

Will my current LCD box work with the new speed controllers?

No...it does not.

However, the LED programmer card that came with all the REVENTON ESC (except the Stock Club Race) will have the USB connection port that you can connect via the computer. It is just like the LCD card except it is not LCD with 2 lines. The programmer card will be come with the ESC for free.

And this new LED card will allow you to change software and setting via your computer. The software is free to download at SP website.

Cain	03-15-2012 10:09 AM

nice!

AOD	03-15-2012 11:11 AM

Quote:

Originally Posted by Solara (Post 10470869)

That's good to hear. I look forward to the release of the new Reventon esc's.:)

Taman

03-15-2012 10:47 PM

What's optimal operating temp for the 1 cell SP 21.5T & 17.5T motors?

and also the SP V3 17.5T & 21.5T motors?

thanks

Solara

03-16-2012 11:36 AM

All SP motors should NOT be running above 180°F. Sometime it can be run that high or alittle higher, but we would not recommend user to gear/boost above that temperature.

All times are GMT -7. It is currently 04:41 PM.

Page 606 of 896

606

Show 40 post(s) from this thread on one page