The Speed Passion Thread
#3211
Tech Fanatic
iTrader: (22)
I run windows vista home premium too and had the same issues, after doing everything as instructed.
To get this to work all I did was to right click the speed passion application icon in C:\program files\speed passion v1.32 and go to compatibility tab and select run in compatibility mode for win xp and also check the box to run as administrator. All the new softwares are then available to view in the speed passion installer
HIH
Paul
To get this to work all I did was to right click the speed passion application icon in C:\program files\speed passion v1.32 and go to compatibility tab and select run in compatibility mode for win xp and also check the box to run as administrator. All the new softwares are then available to view in the speed passion installer
HIH
Paul
This is what got it to work in the end, run as administrator. I didn't have to run for win xp though.
#3212
kriiiss, 2.1GT Prostock Limit is 9.5T for 2S, because it carry Stock Software
but if you are using Mod Software, it equal to no limit ex: 2.5T for 2S
Like Shawn say it is the Pro ones, not the Lpf.
http://www.speedpassion.net/en/productDetails.asp?p=104
but if you are using Mod Software, it equal to no limit ex: 2.5T for 2S
Like Shawn say it is the Pro ones, not the Lpf.
http://www.speedpassion.net/en/productDetails.asp?p=104
#3214
idk whats gonna happen if i turn it on after i shorted it out
#3215
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete
hope this helps
#3216
Is anybody having problems with the new software on the drag brakes or im the only one?
#3218
I have set the drag brakes on 20% but i don't get the same drag brake force ammount when i leave the throtle off.More drag brake when i leave the throtle when the supercharger has engaged and almost no drag brake when i leave it earlier
#3220
Realy weird but is a fact.
#3222
Tech Initiate
iTrader: (3)
nothing, when you open the speedpassion file, in the window that opens, click devices, then you will see, esc, lcd and motor checker ? click on lcd, then you can upgrade or change to then different softwares.
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete
hope this helps
you'll see the little green lite flash in the lower left corner while upgrading in happening then a pop up window will tell you update complete
hope this helps
Marcus
#3223
#3224
razzor have you upgrade your LCD program box to the newest firmware v1.03_070904 or you still use the v1.02? I still use the v1.02.Could this cause this issue with the drag brakes?
#3225
i updated to the newer firmware for the lcd. didnt try it with the older version.
Was supposed to run at tehregionals but had some errands i had to do in the morning so pitched up late to run race control. Havent run yet but hope to this weekend.
Was supposed to run at tehregionals but had some errands i had to do in the morning so pitched up late to run race control. Havent run yet but hope to this weekend.