T.O.P. Racing "Photon" 1/10 EP Touring Car
#4636
20T center pulley , F Spool & Bell Crank
#4637
Hi
Just got a Photon..need a carpet rubber base set up on Sorex 28
It'd be great if someone could point me in the right direction
Thanks
Just got a Photon..need a carpet rubber base set up on Sorex 28
It'd be great if someone could point me in the right direction
Thanks
#4638
Tech Adept
Hello
I have two differentials, the two are mounted in the same way I will describe:
Both with ceramic balls 3mm 12 pieces, plates polished with sandpaper with WD40 oil in 1200 and finished with 2000
with seven ceramic balls of 1.6 mm mounted.
with 4 cone washers and are mounted this way )()(
the diff pulley mounted to the deepest part to the side of the screw.
With Associated stealth diff lube.
my problem is when I run the first qualification they work well, then starts making a strange noise when apply full throttle, it seems they are loosened, when tightening the noise is worse.
Maybe some part are mounted bad.
perhaps with new ligth plates can solve the problem.
Help please.
Thanks in advance.
Best regards:
Pedro Silva
I have two differentials, the two are mounted in the same way I will describe:
Both with ceramic balls 3mm 12 pieces, plates polished with sandpaper with WD40 oil in 1200 and finished with 2000
with seven ceramic balls of 1.6 mm mounted.
with 4 cone washers and are mounted this way )()(
the diff pulley mounted to the deepest part to the side of the screw.
With Associated stealth diff lube.
my problem is when I run the first qualification they work well, then starts making a strange noise when apply full throttle, it seems they are loosened, when tightening the noise is worse.
Maybe some part are mounted bad.
perhaps with new ligth plates can solve the problem.
Help please.
Thanks in advance.
Best regards:
Pedro Silva
Last edited by pmc; 06-13-2010 at 03:30 PM.
#4639
Tech Master
iTrader: (17)
Hello
I have two differentials, the two are mounted in the same way I will describe:
Both with ceramic balls 3mm 12 pieces, plates polished with sandpaper with WD40 oil in 1200 and finished with 2000
with seven ceramic balls of 1.6 mm mounted.
with 4 cone washers and are mounted this way )()(
the diff pulley mounted to the deepest part to the side of the screw.
With Associated stealth diff lube.
my problem is when I run the first qualification they work well, then starts making a strange noise when apply full throttle, it seems they are loosened, when tightening the noise is worse.
Maybe some part are mounted bad.
perhaps with new ligth plates can solve the problem.
Help please.
Thanks in advance.
Best regards:
Pedro Silva
I have two differentials, the two are mounted in the same way I will describe:
Both with ceramic balls 3mm 12 pieces, plates polished with sandpaper with WD40 oil in 1200 and finished with 2000
with seven ceramic balls of 1.6 mm mounted.
with 4 cone washers and are mounted this way )()(
the diff pulley mounted to the deepest part to the side of the screw.
With Associated stealth diff lube.
my problem is when I run the first qualification they work well, then starts making a strange noise when apply full throttle, it seems they are loosened, when tightening the noise is worse.
Maybe some part are mounted bad.
perhaps with new ligth plates can solve the problem.
Help please.
Thanks in advance.
Best regards:
Pedro Silva
#4640
Tech Master
iTrader: (63)
#4641
Tech Champion
iTrader: (27)
Contact Rod here and he will be only to happy to Help you with any Questions , I believe he was getting the latest kits into Stock ..
#4642
Thats the kit I'm driving now and it's great.
Things changed from the "normal" kit: (What I remember)
New chassis and topplate - Especially for LiPo
New shocks - More smooth and doesnt leak oil - Very nice.
New drive shafts in better material and with lasertext on to identify length
New screws for topplate and camberplates - Harder. You need a 2mm wrench
New improved centershaft for the pulleys
New rear arms with more holes for dampers
Possibility to turn the diff and spool so You can move the electronics right
Maybe even more, but thats what I remember without having the car in front of me. :0)
The car is great and so easy to drive
Last edited by *SBH*; 06-14-2010 at 10:50 PM. Reason: Typing error
#4643
Is there a winning last Reedy Races 17.5 or 13.5 set up ?
#4644
Tech Master
iTrader: (23)
SBH, thanks so much for the detailed info!
Hi there.
Thats the kit I'm driving now and it's great.
Things changed from the "normal" kit: (What I remember)
New chassis and topplate - Especially for LiPo
New alloy LiPo battery mounts - Very nice look
New shocks - More smooth and doesnt leak oil - Very nice.
New drive shafts in better material and with lasertext on to identify length
New ball heads all over the car - more smooth and You need a 2,5mm wrench
Alloy suspension mount inserts as standard - You save 8 gram
Ceramic diff balls as standard
New screws for topplate and camberplates - Harder. You need a 2mm wrench
New improved centershaft for the pulleys
New rear arms with more holes for dampers
Possibility to turn the diff and spool so You can move the electronics right
Maybe even more, but thats what I remember without having the car in front of me. :0)
The car is great and so easy to drive
Thats the kit I'm driving now and it's great.
Things changed from the "normal" kit: (What I remember)
New chassis and topplate - Especially for LiPo
New alloy LiPo battery mounts - Very nice look
New shocks - More smooth and doesnt leak oil - Very nice.
New drive shafts in better material and with lasertext on to identify length
New ball heads all over the car - more smooth and You need a 2,5mm wrench
Alloy suspension mount inserts as standard - You save 8 gram
Ceramic diff balls as standard
New screws for topplate and camberplates - Harder. You need a 2mm wrench
New improved centershaft for the pulleys
New rear arms with more holes for dampers
Possibility to turn the diff and spool so You can move the electronics right
Maybe even more, but thats what I remember without having the car in front of me. :0)
The car is great and so easy to drive
#4645
#4649
New brand name gear diff for Photon,
around next week release !
around 15g only
around next week release !
around 15g only
#4650
Tech Elite
iTrader: (171)
Join Date: Sep 2003
Location: Brooklyn New York GO HARD OR GO HOME!!!!!!
Posts: 4,362
Trader Rating: 171 (100%+)
I need 2 please