mikky32

No problem.

Boost 15
Turbo Max
Throttle 5
Brake 75%
Motor timing 10 Tekin redline 10,5T
5 cell.
Turbo delay 0,8.
We have tested also a 1 sec delay but the car accelerated a bit faster when the turbo came in.
It was not much. half a car length.
6.00FDR

Track size
131.23 feet x 82.02 feet.

On a big track I use also the same Boost and Turbo but I used lipo with a 10,5T.
I used at that time 0,5 turbo delay but I now now 0,8 to 1 sec is better.
6.3FDR. I now now that my top speed was higher with the right Turbo delay.
I had at that time the same top speed as the others. Also a GM combo.
As i had used an other Turbo delay I would be the fastest on the straight and infield.
The Gm driver asked me what I used. he was impressed by the power.
He wants also a Tekin RS Pro.

Don't use to much timing. You lose a lot of power.
The LRP I use 18 Boost instead 15 Boost.
The LRP needs more Boost to run good.

loriding69

iTrader: (25)

Running stock truck now with the RS. All i can say is:


FREAK'N AWESOME POWER

dave_oline

Nah there's nothing at all. just coasts in whichever direction it's going when it turns off.

20 SMOKE

iTrader: (103)

calm down you dont want to blow a resister

loriding69

iTrader: (25)

Sorry! Gotta go and get another one today

cyanyde

Don't get too excited. I'm currently having a tough time keeping up with those running this esc. Its fairly new and just a handful of them running in the states but like 90% here in Malaysia. Heaps of punch and speed.

yokemad

yep My Club Mate Azman Azam S. is a Orca driver it's a great ESC with that handy tiny Programmer works great

Lost Aggresiva

iTrader: (2)

Wow, that thing is a beast. Must be interesting trying to shoehorn it into a 1/12th scale....

Bill.

Brollywood

iTrader: (11)

Randy,
after playing with the turbo delay the last few days i noticed something odd. when trying to match the setups of the iic i noticed that the turbo delay is not possible with my v200. they run 0.2 delay and the lowest im able to get is0.5. just curious whats up.

mikky32

This was only for the iic. It's not possible with the V200.

Randy_Pike

iTrader: (6)

That low delay was not software anyone had but myself. It was something I was doing "on the side" if you will.

We're working on some new software right now...

mikky32

And when will it be ready Randy?
And what will it do even better?
Just curious

yokemad

Tekin support no1 in this hobby
always chasing for the best out of their products ...
keep up good work ...

tallyrc

iTrader: (12)

anyone?

big al

iTrader: (10)

I would think you would want to be in the 4.5-4.7 fdr with a straight like that.

Anyone else have any input??