sidecarphil1

iTrader: (1)

i have been out today with my SP13.5 v3 and did a lap time of 18.3

then i took it out put the 10.5 version in re-geared the car and turned all the turbo,timing off and did a 18.6 !!!!!

go figure !!!!

we have 2 stock classes
1, timable speedos and 13.5
2, non timable speedos and 10.5

i am as quick with the 10.5 as i am with the 13.5 with turbo and timing

should have bought an EZrun and 10.5

only kidding i love the tekin really

evolution1

Hello,

Can I use a 6.5T motor with an RS Pro ? Do I need an other Power Cap ? Good setup to begin ? Thanks.

Tia, evolution1

sidecarphil1

iTrader: (1)

PAGE 1000

20 SMOKE

iTrader: (103)

you can use the pro and it shouldn't need a cap but if it gets hot add a second one.what is it going to be in

evolution1

I want to use it in a MI4lp.

Thanks.

20 SMOKE

iTrader: (103)

start in dual mode with 65-70 timing advance with a fdr around 9.5-10.5

radio_car_racer

iTrader: (1)

Novak Ballistic 10.5

what's the standard timing on these motors?

what rollout for open indoor carpet track with Tekin esc

this is the venue

+ YouTube Video

20 SMOKE

iTrader: (103)

what car

radio_car_racer

iTrader: (1)

12th on 1s SMC 50c lipo

lidebt2

iTrader: (21)

Any news on the Iphone app??

immrwright7

iTrader: (1)

Just setup my Tekin RS Pro 13.5 system is the harness needed? Also in order to adjust the esc do I need the hotwire? Sorry for all the noob questions.

20 SMOKE

iTrader: (103)

yes you need a hotwire for the timing features and updates.what harness

TrevCoult

Alex, here are Paul Ash's settings from the Maritime national.

http://www.rcracechat.com/vb/showthr...l=1#post404847

They should be a good starting point.

The 0 mark on the Ballistic is 30 degrees, higher than most others.

Trev

immrwright7

iTrader: (1)

There is a black wire that seems like it connects from the motor to the ESC I was wondering if that was needed.

sidecarphil1

iTrader: (1)

yes , this is the sensor wire this tells the speedo infomation from the motor

if you dont use it the speedo will stay in sensorless mode

and the hotwire is a really good buy if you want to release the full potential of the Tekin RS