![]() |
:lol:
|
Originally Posted by KA2AEV
(Post 14682507)
Sell your Wife?
:D |
Originally Posted by monkeyracing
(Post 14682769)
But, who's gonna drive me to the track on race day?
|
Hi all,
So I've been looking into this chassis as a class will be opening up in a somewhat local on road track. Just wondering what some of the must have hop ups would be good to begin with or would it be more beneficial to go straight to the pro 2 kit? Cheers. On a thread I opened. Giga mentioned how the v2 chassis is required to run standard stick pack lipos. What batteries are able to be run in the v1 kit? As it will be in a 13.5t mini class. |
You'd need a rounded hard case stick pack. I've got a Gens Ace 4000 25C rounded hard case pack that fits my M03.
|
I'd say minimum hop-ups would be bearings, servo saver, dampers and steering. A diff too if your rules allow it.
|
Originally Posted by gigaplex
(Post 14682880)
You'd need a rounded hard case stick pack. I've got a Gens Ace 4000 25C rounded hard case pack that fits my M03.
|
OK Mr M Racing, can this one tempt you? Yokomo MR4-TC Mini.
Rarer than the poo from Rocking Horses. Full Carbon 4WD M Chassis. ebay http://i410.photobucket.com/albums/p...pszmkciurt.jpg http://i410.photobucket.com/albums/p...psaysj3ik3.jpg |
Originally Posted by marcos graveyar
(Post 14682897)
I'd say minimum hop-ups would be bearings, servo saver, dampers and steering. A diff too if your rules allow it.
|
I can imagine sakadachi getting in on that full carbon 4WD mini action :nod:
|
Originally Posted by B3nno810
(Post 14682900)
Cheers. I have the YR shock package and drive train steering upgrade package in a cart atm. Bearing kits are made by a few different companies it seems which is good. Only rules I've been able to find so far, as that it needs to be fwd, limited turn motor and 2s.
Before going nuts with upgrade packages, you might want to know that most clubs in Australia run rules that only allow upgrades made by Tamiya, or have an equivalent Tamiya option (with some exceptions). Not sure if your club is going to run that. Check out the rules listed on the SERCCC website for a guideline. |
Originally Posted by gigaplex
(Post 14682904)
I'd recommend Plaig Bearings. Free delivery in Australia. They've even got an M05 complete bearing kit available.
Before going nuts with upgrade packages, you might want to know that most clubs in Australia run rules that only allow upgrades made by Tamiya, or have an equivalent Tamiya option (with some exceptions). Not sure if your club is going to run that. Check out the rules listed on the SERCCC website for a guideline. Uhhhh cheers. It will be getting possible runs at bayswater. And maybe in Kalgoorlie if we can get it started. Apparently alot of the people here run the YR hop ups on them and are allowed. But there are no rules under AARCMCC, but I'll have a look at the ones you posted. |
Originally Posted by gigaplex
(Post 14682901)
I can imagine sakadachi getting in on that full carbon 4WD mini action :nod:
|
Originally Posted by sakadachi
(Post 14682991)
:lol: Already got a new chassis for this winter. :D I'm going to limit myself to not buying anything more this season besides maintenance stuff.
|
I can imagine sakadachi getting in on that full carbon 4WD mini action Already got a new chassis for this winter. I'm going to limit myself to not buying anything more this season besides maintenance stuff. HA!! Good luck my friend. I've said that many o' times. :) |
| All times are GMT -7. It is currently 10:34 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.