Tamiya mini cooper
Tech Master
iTrader: (112)
Hi guys
We just received a shipment of mini gear diff for M05/M06
Those are the oil filled gear diff.
http://store.hkshobby.com/product_in...oducts_id=9380
We just received a shipment of mini gear diff for M05/M06
Those are the oil filled gear diff.
http://store.hkshobby.com/product_in...oducts_id=9380
I think they should but not positive
Will these work in the M03 too?
I think they should but not positive
I think they should but not positive
Later,
Calvin.
R/C Tech Elite Member
iTrader: (10)
It's better than the caterpillar shell.
Tech Master
iTrader: (7)
Tamiya 4WD M-CHASSIS
unfortunately it runs 380 motor
Tech Fanatic
iTrader: (54)
Now that there are three "Spec" tires (1016, 1028, 1029) available for the TCS, any recommendation of which tire or combination of "Spec" tires would be better for carpet? I already use the "S" Specs (1016) for my M03 and M06.
Also, I have not seen them released in the U.S. When might they be available?
Doesn't having three choices skew the logic of a Spec tire?
What are your thoughts?
Thanks
Also, I have not seen them released in the U.S. When might they be available?
Doesn't having three choices skew the logic of a Spec tire?
What are your thoughts?
Thanks
Last edited by CSeils; 12-09-2011 at 08:11 AM.
R/C Tech Elite Member
iTrader: (10)
I've had good luck with A slicks on the front and S radials on the back on my M-03. Might be worth shot.
Tech Apprentice
what are the Diameter / length of tamiya short spring suitable for M05 / m03 ?
i got 3racing shocks on my m05, wondered if tamiya tuned short spring set will fit?
is there a good alternative body post options for in the front?
i got 3racing shocks on my m05, wondered if tamiya tuned short spring set will fit?
is there a good alternative body post options for in the front?
Hi all looking for imformation on a bumper (foam)
for the mo5.
Many thanks....
for the mo5.
Many thanks....
Tech Apprentice
Tech Champion
iTrader: (136)
Tamiya used to sell a foam block of bumper material. So, you could carve your own.
Tech Apprentice
this is 3racing one.
It cost less than £10 posted to me.
It cost less than £10 posted to me.