Yokomo MR-4TC SD
#2852
Tech Fanatic
Re: Re: Rayspeed SD
Originally posted by Randman
Are there any pics of this car avalible yet?
Are there any pics of this car avalible yet?
#2855
Tech Fanatic
Re: Re: Re: Re: Rayspeed SD
Originally posted by See
This is STLNLST.....are you racing this weekend? I'm coming out of retirement along with Mike and Dujuan and we are looking to do a little rubbin' is racing this weekend.
This is STLNLST.....are you racing this weekend? I'm coming out of retirement along with Mike and Dujuan and we are looking to do a little rubbin' is racing this weekend.
#2857
Tech Rookie
Does anyone know the differences from the std SD chassis to the Rayspeed?
Different battery position?
Steering post position?
Longer/shorter chassis?
Is there any real difference from the original SSG or black yokomo one.
Thanks
Different battery position?
Steering post position?
Longer/shorter chassis?
Is there any real difference from the original SSG or black yokomo one.
Thanks
#2858
same front and rear shock towers with new holes
different servo position with a new steering rack
no third deck
lighter chassis (there are a lot of cuttings)
can see the pics here:
http://www.jcube-hobby.com/gallery/index.php
different servo position with a new steering rack
no third deck
lighter chassis (there are a lot of cuttings)
can see the pics here:
http://www.jcube-hobby.com/gallery/index.php
#2859
is it worth it?
#2860
I wait to see if Rayspeed will release a conversion kit, depends on the price....
at least it looks cool
at least it looks cool
#2861
I wait to see if Rayspeed will release a conversion kit, depends on the price....
at least it looks cool
at least it looks cool
#2862
Tech Fanatic
iTrader: (53)
Originally posted by Matt Howard
James- then run mod
Am I the only one that was planning on going to the ROCKS race this weekend? I might just go to speedworld so I can lap stlnlst
James- then run mod
Am I the only one that was planning on going to the ROCKS race this weekend? I might just go to speedworld so I can lap stlnlst
#2864
Regional Moderator
iTrader: (9)
Hey guys. Its been a while since I posted here.
The car is still handling well. I've made my way back to the kit stock setup after exploring some other setups of my own. I plan on playing around with the camber link positions up front a little this weekend, just to see what happens. But thats about it.
My car still has the problem it developed a few weeks ago, which is turning left slightly better than it does right, but its not as extreme as it was a couple weeks ago. I've checked all the usual suspects to find the problem, but I'm still searching.
But, thats about it. No real breakage issues. Although I'm a little disappointed that the lower kingpin keeps backing itself out. Even when I use a new knuckle and its been screwed in and taken out only once, thats enough to have it backing out.
Other than that...everythings pretty much all good.
The car is still handling well. I've made my way back to the kit stock setup after exploring some other setups of my own. I plan on playing around with the camber link positions up front a little this weekend, just to see what happens. But thats about it.
My car still has the problem it developed a few weeks ago, which is turning left slightly better than it does right, but its not as extreme as it was a couple weeks ago. I've checked all the usual suspects to find the problem, but I'm still searching.
But, thats about it. No real breakage issues. Although I'm a little disappointed that the lower kingpin keeps backing itself out. Even when I use a new knuckle and its been screwed in and taken out only once, thats enough to have it backing out.
Other than that...everythings pretty much all good.
#2865
R/C Tech Elite Member
iTrader: (47)
Originally posted by utieh
same front and rear shock towers with new holes
different servo position with a new steering rack
no third deck
lighter chassis (there are a lot of cuttings)
can see the pics here:
http://www.jcube-hobby.com/gallery/index.php
same front and rear shock towers with new holes
different servo position with a new steering rack
no third deck
lighter chassis (there are a lot of cuttings)
can see the pics here:
http://www.jcube-hobby.com/gallery/index.php