asc6000

iTrader: (15)

depends on where you want it.
per cubic foot
lead 708
brass 536
tungsten 1204
they sell tungsten weights for those pine derby wood cars...

.AJ.

Just got a XB4, certainly a step up from my SX3

.AJ.

Finished putting the chassis together, the build was one of the most enjoyable I've done for a while with Zero issues







Just the paint to do now

asc6000

iTrader: (15)

Looks great (new cars do) if you run on dirt turn the front shocks around to keep those little bleed screws from packing with dirt.

aloksatoor

iTrader: (43)

I cut 1 inch width 0.091 thickness brass from ace to fit behind the saddles between the back of the pack and the rear battery post. Fits perfect and 40 grams total is what I needed jumps and corners like a champ now. I am running 1.6x2 front pistons and 1.7x2 rears. Cars very good now even with half bald tires!

poorboy racing

iTrader: (1)

can you post any pics.

Jay rb5

iTrader: (36)

my kit came with the O rings for the shock cap also.

kenny lutz

iTrader: (38)

Have the 1.5 1.1 2+2 pistons from avid coming and the some under trays and bumpers from bugle boy racing.

aloksatoor

iTrader: (43)

Sure when I reach home Ill put it here.

farm

Hey,

how many custom pistons XB4 kit contains?

asc6000

iTrader: (15)

The kit contains these
2 hole 1.4mm
3 hole 1.3mm
6 hole 1.0
6 hole 1.1
6 hole 1.2
and one set of blank pistons with no holes....

farm

U mean one of each ?

and one set of blank pistons with no holes / set = 2pcs/pcs4?

aloksatoor

iTrader: (43)

4 pistons of each type he mentioned. Come on two parts trees.

asc6000

iTrader: (15)

thanks I should have mentioned that part
In case anyone is interested I posted up a nib xb4 for $400 shipped in the classifieds.

Thereallion

The center hole in my Spur gear is deformed. Is this a sign of the slipper being too loose or too tight?? Anyone else run into this?