|
Originally Posted by vr6cj
(Post 11171882)
If some where wondering if the new Losi 22sct body fits on a sc10. Yes it does. My favorite body so far to come out and I tested it on my sc10. Here's pic. Yes, I have both FTsc10 and 22sct.
http://i35.photobucket.com/albums/d1...j/DSC_2366.jpg |
No, they dont come pre-painted. They have two versions though. Ones pre-cut and the other isnt.
|
..
|
+1 larger outside bearing
|
Originally Posted by vr6cj
(Post 11172689)
No, they dont come pre-painted. They have two versions though. Ones pre-cut and the other isnt.
|
Hey guys I have a slight traction prob going on here, the prob is only in two places on the track one in the apex of a big sweeper and at a 160 deg sharp turrn my back enjd washes a tad I can catch it mkost of the time and the only fix I have had working is not going so fast in those spots but I know there ia something I can do wit setup to fix this issue. I'm running
Chad due setup with some tweeks 35 wt oil ft 3 piston 31 ride height Losi bb green Less aggressive tire up front Rear is 30 wt oil and 1 piston 29 ride height Losi white .5 deg hubs Gold barcodes Help please |
Originally Posted by gamedog1966
(Post 11173389)
Hey guys I have a slight traction prob going on here, the prob is only in two places on the track one in the apex of a big sweeper and at a 160 deg sharp turrn my back enjd washes a tad I can catch it mkost of the time and the only fix I have had working is not going so fast in those spots but I know there ia something I can do wit setup to fix this issue. I'm running
Chad due setup with some tweeks 35 wt oil ft 3 piston 31 ride height Losi bb green Less aggressive tire up front Rear is 30 wt oil and 1 piston 29 ride height Losi white .5 deg hubs Gold barcodes Help please |
Man u hit it dead on the head vr6cj, I thought I had it low enough guess I was wrong lol. Thanks bro
|
|
What is the purpose of running the body mount brace?
|
I love your question ^^^^^ Looking forward the replies.
|
to stiffen the mount.
|
Is it advantageous to stiff the mount?
|
This was discussed only a couple pages back...
|
ok, I was using the search function, had to state that, but i didnt see "how" to drill the 4th hole. Can I user an old tower and offset it and bolt it on then drill the hole using the old tower as a template? Also, most o the setups seem to be for med to high bite, I run on low to medium. is the 4th hole even required? Same with C hubs. I run A hubs on my b4 and they work well on my local track. So would I stick with A on the truck? I am not a fan of the shaved brace, they brake non stop. I know strc makes an alum one.
Maifields setup from last years nationals looks like it might be a winner for my local outdoor track. His tire choice confuses me though. http://www.teamassociated.com/pdf/ca...rnats_2010.pdf |
| All times are GMT -7. It is currently 07:28 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.