well i rebuilt my shocks using the trackstar o-rings. Thay are super smooth and do not leak anymore, but the rear end is so bouncy. I have the blue springs, stock pistons with 30wt oil. It just bucks and kicks up alot. Not very fun to drive. There is a rythm section that if you get tossed around on its not a pretty sight. Any suggestions?

I would try going down on shock oil.

Try 1.3 pistons with 37.5 or 40wt

i had 25wt before and it did the same. guess i will have to mess with it some more

Build the shocks emulsion style.

they are

25wt with 1.2 pistons is not the same as 37.5 with 1.3 pistons. it sounds like you have too much pack.

Make SURE they have no rebound when you build them. Lower your ride height & possibly try white springs if blues are too stiff. You can also lean your shocks in on the tower.

thanks man. I will give it a shot. There are a couple other guys that have these and they are dialed. Different setups work for different drivers

are you bleading them right? I run 27.5 with blue springs and sway bars with 1.2 piston on the rear and truck is very planted on a VEERRRRYYYYY rough 1/8 scale track.

Waisted a few battery straps but got er done. Just over legal weight with body on. Its dirty, but fast. Battery is a 2 cell 4000 mah 65c

Yes i have bled them correctly. Even watched the Youtube video just to make sure.

hmmm... what kind of track are you running on?

Ride height. Where is it?

Looks good Eli! What motor were you running? That thing is fast!