Originally Posted by sbrewer (Post 10434565)

Hello all, I just wanted to get your thoughts on must do upgrades. I ran this past weekend at the Bigfoot open @ Mikes Hobby shop. Took 3rd in the d main. Lol not much to be proud of but it was my first race on an offload track in about 10 years. My Sc10 4x4 is 100% stock other than adding sway bars. The turck still ran great and hooked up. Mostly was driver error lol, there where 55 enteries mostly Losi & only about 5 maybe 6 Sc10 4x4s a main was only 1 Sc10 4x4. I'm a fairly good driver, I needing advice on what to do to make the truck more competitive. Thank you in advance for any tips and suggestions .
I forgot to add I am currently running
Novak 5.5 Hv 15 pinion
HobbyWing 150a Xerun
Everything else in a stock RTR truck

Originally Posted by rc8n21bf (Post 10434949)

I have been reading through this thread and have found a lot of useful information for my own sc10 4x4. I was wondering the best cheapest place to get the center chassis brace. I found some one ebay but not sure if they are a good deal or not. Im sure this has already been posted in here but there are just way too many pages to look through. Thanks

Originally Posted by lodhammerdin (Post 10434518)

Looks good. What fan is it do you know?

Originally Posted by Eaglesrx (Post 10434295)

This is good to know. Been following this thread as I'm looking to getting the factory team sc10 4x4. Also read rc car action magazine's recent comparison of the sc10 4x4 to losi scte. Seems that once you get this truck tuned to your track and drive it right, it has the potential to run at least as fast, if not faster lap times than any other 4wd short course truck.

I know cavalieri and maifield are crazy good drivers and could probably drive a shopping cart faster than my 2wd sc10, but whenever I see videos of them driving their sc10 4x4, it looks quicker and faster than any other brand of truck out there.

keep us updated on how the your sc10 4x4 runs. thanks,

Originally Posted by CraigMBA (Post 10433386)

37 front, 35 rear, 1.2 conventional pistons both ends, four 4.8 rate yellow springs. I building up another set of shocks with 1.1 pistons just in case I don't have enough pack in the rear.

Originally Posted by sbrewer (Post 10434565)

Hello all, I just wanted to get your thoughts on must do upgrades. I ran this past weekend at the Bigfoot open @ Mikes Hobby shop. Took 3rd in the d main. Lol not much to be proud of but it was my first race on an offload track in about 10 years. My Sc10 4x4 is 100% stock other than adding sway bars. The turck still ran great and hooked up. Mostly was driver error lol, there where 55 enteries mostly Losi & only about 5 maybe 6 Sc10 4x4s a main was only 1 Sc10 4x4. I'm a fairly good driver, I needing advice on what to do to make the truck more competitive. Thank you in advance for any tips and suggestions .
I forgot to add I am currently running
Novak 5.5 Hv 15 pinion
HobbyWing 150a Xerun
Everything else in a stock RTR truck

Originally Posted by CraigMBA (Post 10435079)

Wait two weeks for AE to release ASC91182 the FT piece. It's listed on the AE site for like $18. IMO it's the best one so far because it anchors to the rear shock tower, which is way more robust than all of the other options.

Originally Posted by Oasis (Post 10435505)

So your using the rear springs up front? Do you still have adjustments on your ride height? I just bought a set of yellow fronts..guess I need to go get another set of yellow rears..

Originally Posted by Jorge T (Post 10435791)

You will need the new FT rear shock tower for using the FT piece. The tab on the one we have will break off with the first impact.