9LikesLosi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
06-21-2011, 09:15 PM
06-21-2011, 09:21 PM
I see how you roll salad lmao! at 3:16 hacking everyone lol just messin with you.
06-21-2011, 09:24 PM
Great video. One thing I do notice in that video is it seems to be pretty tight and like's to push the front end which I am sure that can be corrected easily.
06-21-2011, 09:48 PM
need some help here. i'm just about finished with my ten-t to SCTE conversion. my issue is the front bumper. when i put the holes between the diff case and chassis, the diff case does not sit flush into the cut out on the chassis. what am i missing? the exploded view in the manual sucks by the way, so that wasn't much of a help.
well since im waiting for some new goodies i decided to tinker for a bit
truggy wing, mount and front bumper
not to mention it lost a bit more lard
06-21-2011, 09:51 PM
are the front of the hinge pin holder covers sitting correctly on to the chassis? i had the very same issue the other day after i change hinges and thats eactly what happend. the little 90 degree notch on the hinge pin cover wasnt sitting right or it could be the cases as mentioned.
i bet to differ. stock for stock they feel the same. i can out turn my buddies ae and im not kidding it turns on dime...that is after i modded the spindle and carries like i did in my truggy for even more steering throw
well since im waiting for some new goodies i decided to tinker for a bit
truggy wing, mount and front bumper not to mention it lost a bit more lard
i bet to differ. stock for stock they feel the same. i can out turn my buddies ae and im not kidding it turns on dime...that is after i modded the spindle and carries like i did in my truggy for even more steering throw
well since im waiting for some new goodies i decided to tinker for a bit
truggy wing, mount and front bumper
not to mention it lost a bit more lard
06-21-2011, 10:00 PM
06-21-2011, 10:07 PM
I just drove the AE box stock with RX8 and scx 4.5 and it was very smooth. Better on the bumps than i thought. I was impressed. I also just drove the Losi on 3S with a castle 4 pole motor and is was a beast. I need to try it agian in 2S and see how it handles our track. The losi was better in the air but they were neck and neck down straight and in turns. I'm very impressed with the Losi with all the power it had going thru it. Might have to dump my first place Jammin scrt and give losi a try.
06-21-2011, 10:12 PM
I just drove the AE box stock with RX8 and scx 4.5 and it was very smooth. Better on the bumps than i thought. I was impressed. I also just drove the Losi on 3S with a castle 4 pole motor and is was a beast. I need to try it agian in 2S and see how it handles our track. The losi was better in the air but they were neck and neck down straight and in turns. I'm very impressed with the Losi with all the power it had going thru it. Might have to dump my first place Jammin scrt and give losi a try.
06-21-2011, 10:43 PM
Tech Master
iTrader: (1)
Pretty cool, I had just watched another Video on the Tube of a Race With Kyle Johnson Driving and It seemed it was pretty nimble mid flight. Going to go pick this truck up friday from the LHS.
Would the Mamba Max Pro and the Neu 1415 be a pretty good setup? I already have the ESC but cant use the 4600kv CM36 motor.
Would the Mamba Max Pro and the Neu 1415 be a pretty good setup? I already have the ESC but cant use the 4600kv CM36 motor.
not even there. His Dad Kenny is a pretty darn good tuner also"
06-21-2011, 10:50 PM
DUH! hes WINNING, im going to vegas actually monday and staying at kyles house, hopefully one of the days we will head to 702. Kyle is going to come down to san diego for 4th of july for 2 weeks and gonna go to WCRC. I need kenny to set up my truck, i keep forgetting to ask.
06-21-2011, 11:07 PM
I just want to know, but who has already ordered the BCE chassis?
06-21-2011, 11:07 PM
Tech Master
iTrader: (1)
DUH! hes WINNING, im going to vegas actually monday and staying at kyles house, hopefully one of the days we will head to 702. Kyle is going to come down to san diego for 4th of july for 2 weeks and gonna go to WCRC. I need kenny to set up my truck, i keep forgetting to ask.
Kenny is real helpful with set up's, all you have to do is ask. Kenny even
pulled tires off their truck and lent them to me for one run. If you remember
to ask you will get plenty of help from those two...
06-21-2011, 11:14 PM
I no, its just i get to excited when im at a track and want to run, not sit around tuning my car lol thats why i forget. Ya kenny somehow has the magic setups, i hope to race kyle during practice at 702
06-21-2011, 11:19 PM
Tech Master
iTrader: (1)
06-21-2011, 11:24 PM