arm2storm

iTrader: (25)

So whats an absolute Bulletproof motor/esc combo for this truck??

SDavidson

iTrader: (17)

I have to sell my Ten-SCTE for financial reasons. I wanted to give the guy's on this forum the first chance before I put in on the "for sale" forum. The truck has only been test run in the yard for a few minutes. The grease has been removed from the diffs and 4-7-2 oils put in. The chrome rings have been removed form the wheels and the body has been painted. I hardened the diff pins myself and they had/have little wear on them. I'm asking $250 plus shipping but feel free to make an offer. No trades please.

PM me if your interested. It goes in the for sale forum tomorrow.

Thanks

D-money

iTrader: (31)

your backwards in your conversion ae 30 is 32.5 losi

Cts Losi WT Associated WT
100 10 7.5
150 15 12.5
200 20 17.5
275 25 22.5
300 27.5 25
350 30 27.5
400 32.5 30
425 35 32.5
450 37.5 35
500 40 37.5

racerx1920

iTrader: (218)

i change my front sway bar on my truck to the swaybar on ryan setup, helped with body roll

8ight-e

iTrader: (58)

I stand corrected.. at any rate, for me anyway 40wt ae front and 30wt ae rear works great, jumps great.. and maybe worth trying. I use the stock springs and discs all around.

My rear springs I did shorten slighlty (cut top off). If you do this, do it knowing you cannot go back and don't be mad if you don't like it. I wanted different ride heights than I could get w/ it so I cut it until I can get a silver (soft) spring.




PS I don't need a stiffer spring in the front on my truck but this maybe due to mine is quite a bit lighter than stock.

fireflysti

iTrader: (12)

My setup is MMP with Neu 1509 1.5D 4500kv, 2s 5250mah 60C. This motor is a monster, with a 12T pinion, I get up to 40mph on the straightaway, it runs at 130 degree all day. Here is a video I posted 100 pages ago

+ YouTube Video

S/X Runner

iTrader: (37)

Are you saying you cut a little off of the spring off to get what a silver spring would be?

Please tell me this is what you are saying.

8ight-e

iTrader: (58)

Not exactly.. I had my retainers backed off all the way with the stock spring and couldn't get what I wanted for ride height, keep in mind slightly reduced weight. No spring choices are a available for now so I just trimmed my rear springs.. this changes a lot of things but it works, at least for me, and it gives me the feel 'I' like w/ the stock discs and 30wt ae oil.

wheelz

Wldmoose

iTrader: (3)

I'm not defensive, I just have a different point of view than you do.... and I'll say so. I simply don't like it when others that have no business doing so tell people what should or should not be posted on a thread. As long as it pertains to the Losi SCTE...its all good in my book. Complaints and all. And with that I'll get off my soapbox....

Excellent idea on the page one deal SaladFork. I didn't know you were providing that service for all of us. Thanks !! Makes it much easier for us ADD guys....

Cult Racing

iTrader: (42)

I agree, but i use the rx8 and same thing and i use a 16t and im in the 130s after a full battery run about 8-11 min

Wldmoose

iTrader: (3)

For all you weight conscious guys, SNR Graphite is making a carbon fiber shock tower / body mount combo for the Losi SCTE. You have to use the Jammin SCRT10 body mounts with it though. Steve makes top notch stuff from my experience. http://www.snrgraphite.com/
I'm not sure if, or how much, the location of the body pins move versus stock.

SC_RAGE

For those who just joined the thread. read back before you post. All the answers are in this thread.

Cult Racing

iTrader: (42)

not trying to burst your bubble or anything, but a couple people already have posted about that. Jammin also made CF towers for it.

http://jamminproducts.com/BuyLosi.html

SC_RAGE

I was debating on saying anything due to past responses.