Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
It looks like only two days for shipping
Your item was delivered at 2:33 pm on October 21, 2011 in ELYRIA, OH 44035.
Electronic Shipping Info Received, October 19, 2011
Start/Order Date>Transaction Date:October 19, 2011
We Try Harder>>>
Again A very Big!!! Thanks to all of the SCTE Racers Here for Buying/Suporting
and Posting our products. Really happy you guys are doing well, If you get a chance, send some of your Build/Racing Pics to our BCESPEED Site, We are going to have a full section dedicated just to the 4X4 Racers,
BCESPEED SCTE 4x4 Pro
Tech Addict
iTrader: (22)
Thanks Chop for the update
It looks like only two days for shipping
Your item was delivered at 2:33 pm on October 21, 2011 in ELYRIA, OH 44035.
Electronic Shipping Info Received, October 19, 2011
Start/Order Date>Transaction Date:October 19, 2011
We Try Harder>>>
Again A very Big!!! Thanks to all of the SCTE Racers Here for Buying/Suporting
and Posting our products. Really happy you guys are doing well, If you get a chance, send some of your Build/Racing Pics to our BCESPEED Site, We are going to have a full section dedicated just to the 4X4 Racers,
BCESPEED SCTE 4x4 Pro
It looks like only two days for shipping
Your item was delivered at 2:33 pm on October 21, 2011 in ELYRIA, OH 44035.
Electronic Shipping Info Received, October 19, 2011
Start/Order Date>Transaction Date:October 19, 2011
We Try Harder>>>
Again A very Big!!! Thanks to all of the SCTE Racers Here for Buying/Suporting
and Posting our products. Really happy you guys are doing well, If you get a chance, send some of your Build/Racing Pics to our BCESPEED Site, We are going to have a full section dedicated just to the 4X4 Racers,
BCESPEED SCTE 4x4 Pro
+ YouTube Video | |
Tech Addict
iTrader: (22)
just got my revo braces in today now i need to install. like those pics.
Tech Master
iTrader: (32)
At the dave mapston memorial in spokane , washington. Already broke a cf rear shock tower and rear bumper that connects the bumper to the same shock tower. Lucky i had the stockers on hand. But finally got the truck dialed. I think the majority of the field are sc10 4x4s and jammins.
So anything stronger than cf shock towers?
So anything stronger than cf shock towers?
At the dave mapston memorial in spokane , washington. Already broke a cf rear shock tower and rear bumper that connects the bumper to the same shock tower. Lucky i had the stockers on hand. But finally got the truck dialed. I think the majority of the field are sc10 4x4s and jammins.
So anything stronger than cf shock towers?
So anything stronger than cf shock towers?
Tech Master
iTrader: (24)
At the dave mapston memorial in spokane , washington. Already broke a cf rear shock tower and rear bumper that connects the bumper to the same shock tower. Lucky i had the stockers on hand. But finally got the truck dialed. I think the majority of the field are sc10 4x4s and jammins.
So anything stronger than cf shock towers?
So anything stronger than cf shock towers?
Tech Master
iTrader: (1)
Guys with the sticky shock collars, get sum red Scothbrite wrap on the tip of your pinky Finger and spin the collar back and forth,both sides it will de-burr them!!
Mine was the loudest SCTE on our track and I finally figured out what was making all the noise. The center diff plastic standoff had developed a little slop between it and the diff bearing. Replaced the standoff and the screaming coffee grinder is gone. Check yours, grab the center diff and wiggle it. If it got some play, it probably your source for the noise. I think even a small amount of slop creates a harmonic from the angled front driveshaft that makes the diff rattle around.
Last edited by Jedev; 10-22-2011 at 12:20 AM.
Mine was the loudest SCTE on our track and I finally figured out what was making all the noise. The center diff plastic standoff had developed a little slop between it and the diff bearing. Replaced the standoff and the screaming coffee grinder is gone. Check yours, grab the center diff and wiggle it. If it got some play, it probably your source for the noise. I think even a small amount of slop creates a harmonic from the angled front driveshaft that makes the diff rattle around.
Tech Master
iTrader: (45)
Tech Master
iTrader: (45)
Tech Elite
iTrader: (48)
Still chasing temps in this thing:
LRP SPX8 4600 14 T Pinion (203), 13T (253),15T(221)
Speed Passion/4600 13Tmotor temp 118/esc 169()
LRP TC Spec /4600 13T 196(WTF?)
next gonna try an RX8 and before you ask no there is no binding what so ever
LRP SPX8 4600 14 T Pinion (203), 13T (253),15T(221)
Speed Passion/4600 13Tmotor temp 118/esc 169()
LRP TC Spec /4600 13T 196(WTF?)
next gonna try an RX8 and before you ask no there is no binding what so ever