Neesh

iTrader: (128)

I see that you're running the 3s set up. how is it going with that? I run a tekin rx8 with 6.5 550 can and had nothing but problems with heat. geared down and all. tried everything but still ran hot. Just curious about the castle.

Neesh

iTrader: (128)

if anyone is interested, I have both full optioned electric and nitro 810's in the for sale thread.

http://www.rctech.net/forum/r-c-item...l#post10066702

alport78

The motor hold up very well without any heat issues with 3s. Geared for 41mph and temp after 8 minutes running at race conditions is allways around 71-72 celcius. Actually my top speed is a little high and can be geared down a tooth and this will make the temps. even lower

losifiend

iTrader: (73)

Here is mine so far. Bought a Ten-T roller with a bent front tower and 2 busted shock caps. Need to go to the LHS to pick up the caps. Everything else has been replaced. Just waiting on my 17mm conversion items and body to come in. Due to the holidays the mail has been backed up, I guess. Going with 2S setup with the 4.5 Ballistic and a 120A HK ESC as if it were an SCT. Gearing is 48T spur with 14T pinion to start. Possibly gear down to 12-13 if necessary.

RC*PHREAK

iTrader: (146)

did you bore out an 8ight spur? 810/ten-t/SCTE spurs only come in 40T.

losifiend

iTrader: (73)

Stock ten-T spur gear, sharp file and a few minutes worth of elbow grease. No rubbing and came out really well.

badassrevo

iTrader: (12)

I just picked up a roller, The build will start after the CRCRC Midwest Champs.

losifiend

iTrader: (73)

.........................

losifiend

iTrader: (73)

All done.

SolderGlob

iTrader: (13)

What motor/esc combo and gearing are you running?

Edit nvm, Novak 4.5 and HK 120a esc with 14/48

Cesar676

Do you know what other bodys fit in the 810?

Chris K

iTrader: (46)

Just a quick suggestion, you would probably be wise to replace the plastic servo horn with an aluminum one - they don't have a good history....

darryl80

iTrader: (24)

i have a queston for you guys. will a 810 body fit on a ten t? i really like the looks of the 810 body. i am also looking to convery my losi ten t to electric. first looked here beofre i start gutting out all of the nitro clutter in mine.

Cain

iTrader: (294)

you are probably wanting this:

RC Monster also has a conversion, but I don't think it stretches the vehicle at all lengthwise.

http://www.rc-monster.com/proddetail.php?prod=rcm10tkit

based on what others have said in the thread, seems it dimensions are more "legal"

Chris Gierse

iTrader: (165)

Is the Castle MMP/2400kv combo on 3s still the best option for this buggy? If so, what gearing works best? I want to be able to compete with other 1/8 scale buggys. Its a large outdoor track with 10 minute mains. Thanks.