|
Originally Posted by fastchvy
(Post 10558873)
Anybody here try losi big bore springs "AND" kyosho big bore springs, looking for someone who has ran both to see witch one they thought was better....kyosho=$$$$$$
|
Originally Posted by fastchvy
(Post 10558873)
Anybody here try losi big bore springs "AND" kyosho big bore springs, looking for someone who has ran both to see witch one they thought was better....kyosho=$$$$$$
|
Why would you want to shave it
Originally Posted by Asharus
(Post 10557969)
This is true... 2 of my buddies run the 1257/1258 and they have slight rubbing on the servo case and had to dremel a touch. On mine, no rubbing at all.
jamr1130, my bad. I said white fronts / red rears last week, but I just realized that they are yellow fronts / red rears. I got it mixed up with the white front / gold rears on my 2WD. |
Anyone know what the internal ratio of the front and rear gear boxes is (ring and pinion count)?
|
Im pretty sure its 2.1.
|
I have losi greens up front and yellows out back but it feels like the front is a little soft. running losi 35 wt front,30wt Rear. I think Imma try 37.5 up front and work from there.
|
Originally Posted by Buckaroo
(Post 10560309)
Anyone know what the internal ratio of the front and rear gear boxes is (ring and pinion count)?
|
i run 40 up front and 30 in the rear
Originally Posted by NitroLuver
(Post 10563784)
I have losi greens up front and yellows out back but it feels like the front is a little soft. running losi 35 wt front,30wt Rear. I think Imma try 37.5 up front and work from there.
what do you think i should look at not sure where to start any help would be great |
where should i start out with springs
i like running a stiffer front and the rear softer i have do to much testing with the springs I'm looking for a little stiffer in the front than stock AE and not to much stiffer in the back but also stiffer than stock
what do you think i should look at not sure where to start any help would be great |
Big bore or standard?
|
I think standard
Originally Posted by fastchvy
(Post 10565085)
Big bore or standard?
|
Ok guys so I just order a b44.1 and I was looking at Mamba Max Pro 6900kV. What does that mean as far as turns is it like an 8.5t? I am new to electric I dont really know what any of that means and by the way is that a good motor Thanks for the help.
|
If you have alot of rc experience a 7.5 would be better and if thats not enough you can boost it a bit, but if your just starting to drive i would say a 10.5....I'm running lrp esc and lrp 6.5 boosted 1 level and its amazingly fast...
|
Im not new to rc I have been running nitro for about 5 years now. So what turn is 6900 I was thinkin it was around 8.5 or 7.5.
|
Originally Posted by smittyusmc
(Post 10565653)
Im not new to rc I have been running nitro for about 5 years now. So what turn is 6900 I was thinkin it was around 8.5 or 7.5.
|
| All times are GMT -7. It is currently 08:29 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.