asc6000

iTrader: (15)

I had/have both and they are the same.
Whatchoo talkin bout Willis ?

Hoese37

iTrader: (5)

Any 12mm big bore spring will.

mojoman81

iTrader: (26)

I bought the Avid springs and the rears were 2 short so I put the proline uppers on to make up the diff . The bore on the prolines are 10.8mm so I wasn't sure .

Kraig

iTrader: (81)

The SCR's use metric size screws and if you look at the thread they are very fine. Now on the SC, at least the ones that I have had and worked on, they use a course thread pitch or self tapping. Something like this.

frankiecmgt

iTrader: (77)

Can someone here give me a starting point on gearing a 17.5 in this truck. I am a losi guy and I got one of these on a deal and want to try it out. The track I run on is 100x50 clay loam indoor track. I run a 82/26 in my xxx-sct, but I done want to over gear this truck and smoke a new motor. Thanks for the help all..

Johnn27

iTrader: (89)

I run a LRP SPX zero with a trinity revtech motor timing almost all the way up geared at 26/76

dirtman71

iTrader: (4)

I run D3.5 17.5 0 timing no boost. 75/26-27. temps are 115. A FDR of 7.5 is a good starting point. If your going to boost heavy I would go 23 or so on the pinion

frankiecmgt

iTrader: (77)

Thanks for the starting point guys, I will be trying them this weekend and I will let you know the results.

Posvar

iTrader: (470)

How is everybody doing? My SCR-sp is money!

Pimpin

iTrader: (32)

you didnt mention what motor.

noworries

iTrader: (42)

Mine is the money as well. Love my SP. Sure anxious to see what new SCT will be but I also run the RB6. See no reason to get rid of my SP. Very durable. Awesome chassis.

Tyson72

iTrader: (12)

Can anyone help me with the gear diff? I'm pretty new to electric cars. I have a gear diff but can't find the o-ring seals the sit in both ends around the outer drive shafts.. will the associated sc10 seals fit?

eper

iTrader: (14)

tyson72 i have a gear diff that i have had laying around if you want it pm me and i will give it to you. you just need to pay shipping. Its basically new and is complete

dug44

iTrader: (29)

Ebay search TSR pro seals kyosho.... Should be what you need

NicksLime06

I've been out too the hobby for a while and am putting the finishing touches on my SCR and have a quick question about placement of the antenna for the 2.4 Ghz receiver. Can you keep the antenna of the receiver under the body? I would rather not put another hole in the body. Could I just shorten the antenna tube (leaving the antenna itself its original length of course) so it doesn't stick out of the body without negatively effecting signal strength?

I'm using a Futaba R2104GF receiver.

I want to get this sucker done so I can race it for the first time.